ADP123AUJZ

ANALOG DEVICES  ADP123AUJZ  电压稳压器, LDO, 可调, 2.3V至5.5V输入, 85mV压差, 800mV至5V/0.3A输出, TSOT-5

The is a CMOS Linear Regulator designed to operate from an input voltage between 2.3 and 5.5V and to provide up to 300mA of output current. The low 85mV dropout voltage at a 300mA load improves efficiency and allows operation over a wide input voltage range. The ADP123 is the adjustable version of the device and allows the output voltage to be set between 0.8 and 5.0V by an external voltage divider. The ADP123 is specifically designed for stable operation with tiny 1µF ceramic input and output capacitors to meet the requirements of high performance, space constrained applications. This regulator has an internal soft start that gives a constant start-up time of 350µs. Short-circuit protection and thermal overload protection circuits prevent damage in adverse conditions.

.

Fixed and adjustable output voltage versions

.

Very low dropout voltage 85mV at 300mA load

.

Low quiescent current 45µA at no load

.

Low shutdown current <1µA

.

Initial accuracy ±1% accuracy

.

Up to 31 fixed-output voltage options available from 1.75 to 3.3V

.

Adjustable-output voltage range from 0.8 to 5.0V

.

Excellent PSRR performance 60dB at 100kHz

.

Excellent load/line transient response

.

Optimized for small 1.0µF ceramic capacitors

.

Current limit and thermal overload protection

.

Logic controlled enable

ESD sensitive device, take proper precaution while handling the device.