L9951XPTR

后车门执行器的驱动程序 Rear door actuator driver

The L9951 is a microcontroller driven multifunctional rear door actuator driver for automotive applications. Up to two DC motors and two grounded resistive loads can be driven with three half bridges and two highside drivers. The integrated standard serial peripheral interface SPI controls all operation modes forward, reverse, brake and high impedance. All diagnostic informations are available via SPI.

**Key Features**

.

Overload diagnostic for all outputs

.

Open load diagnostic for all outputs

.

Charge Pump output for reverse polarity protection

.

Programmable PWM control of all outputs

.

Current monitor output for all highside drivers

.

All outputs short circuit protected

.

One half bridge for 7.4A load ron = 150mΩ

.

Two highside drivers for 1.25A load ron = 800 mΩ

.

Two half bridges for 5A load ron = 200mΩ

.

Very low current consumption in standby mode IS < 3μA, typ. Tj ≤85 ˚C

.

All outputs over temperature protected

.

Programmable Softstart function to drive loads with higher inrush currents i.e.current >7.4A, >5A, >1.25A