TEXAS INSTRUMENTS SN65HVDA100QDRQ1 芯片, 本地内网接口, AEC-Q100, SOIC-8
The is a Local Interconnect Network LIN Physical Interface integrates the serial transceiver with wakeup and protection features. The LIN bus is a single-wire bidirectional bus typically used for low-speed in-vehicle networks using data rates from 2.4 to 20kbps. The LIN protocol output data stream on TXD is converted by the SN65HVDA100 into the LIN bus signal through a current-limited wave-shaping driver as outlined by the LIN physical layer specification. The receiver converts the data stream from the LIN bus and outputs the data stream through RXD. The LIN bus has two states: dominant state voltage near ground and recessive state voltage near battery. In the recessive state, the LIN bus is pulled high by the internal pullup resistor 30kR and series diode, so no external pullup components are required for slave applications. Master applications require an external pullup resistor 1kR plus a series diode per the LIN specification.
Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
电源电压DC 5.00V min
输出电压 5.5 V
输出电流 2 mA
通道数 1
针脚数 8
耗散功率 230 mW
工作温度Max 125 ℃
工作温度Min -40 ℃
耗散功率Max 230 mW
电源电压 5V ~ 27V
电源电压Max 27 V
电源电压Min 5 V
安装方式 Surface Mount
引脚数 8
封装 SOIC-8
封装 SOIC-8
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99