TEXAS INSTRUMENTS TLE2082CPE4 运算放大器, 双路, 10 MHz, 2个放大器, 35 V/µs, ± 2.25V 至 ± 19V, DIP, 8 引脚
The is a dual high-speed JFET-input Operational Amplifier more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET operational amplifier. The TLE208x also has wider supply-voltage rails, increasing the dynamic-signal range for BiFET circuits to ±19V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in DC-coupled applications. The TLE208x is pin-compatible with lower performance BiFET operational amplifier for ease in improving performance in existing designs. BiFET operational amplifier offers the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes this amplifier better suited for interfacing with high-impedance sensors or very low level AC signals. It also features inherently better AC response than bipolar or CMOS devices having comparable power consumption.
电源电压DC 38.0 V
输出电流 ≤80 mA
供电电流 3.1 mA
电路数 2
通道数 2
针脚数 8
耗散功率 1 W
共模抑制比 70 dB
输入补偿漂移 2.40 µV/K
带宽 10 MHz
转换速率 40.0 V/μs
增益频宽积 9.4 MHz
输入补偿电压 1.1 mV
输入偏置电流 20 pA
工作温度Max 85 ℃
工作温度Min -40 ℃
增益带宽 10 MHz
耗散功率Max 1000 mW
共模抑制比Min 70 dB
电源电压Max 38 V
电源电压Min 4.5 V
安装方式 Through Hole
引脚数 8
封装 DIP-8
宽度 6.35 mm
封装 DIP-8
工作温度 0℃ ~ 70℃
产品生命周期 Active
包装方式 Each
制造应用 信号处理, 传感与仪器
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
TLE2082CPE4 TI 德州仪器 | 当前型号 | 当前型号 |
AD823ANZ 亚德诺 | 功能相似 | TLE2082CPE4和AD823ANZ的区别 |
TLE2082CP 德州仪器 | 功能相似 | TLE2082CPE4和TLE2082CP的区别 |
TLE2082ACP 德州仪器 | 功能相似 | TLE2082CPE4和TLE2082ACP的区别 |