TLC3574IDW

5 V模拟3-5V数字14-12BIT 200 KSPS 4-8CHANNEL串行模拟数字转换器与 5-V ANALOG 3-5V DIGITAL 14-12BIT 200-KSPS 4-8CHANNEL SERIAL ANALOG-TO-DIGITAL CONVERTERS WITH

The TLC3574, TLC3578, TLC2574, and TLC2578 are a family of high-performance, low-power, CMOS analog-to-digital converters ADC. TLC3574/78 is a 14-bit ADC; TLC2574/78 is a 12-bit ADC. All parts operate from single 5-V analog power supply and 3-V to 5-V digital supply. The serial interface consists of four digital input [chip select CS\\\\, frame sync FS, serial input-output clock SCLK, serial data input SDI], and a 3-state serial data output SDO. CS\ works as SS\, slave select, SDI, SDO and SCLK form an SPI interface. FS, SDI, SDO, and SCLK form DSP interface. The frame sync signal FS indicates the start of a serial data frame being transferred. When multiple converters connect to one serial port of a DSP, CS\ works as the chip select to allow the host DSP to access the individual converter. CS\ can be tied to ground if only one converter is used. FS must be tied to DVDD if it is not used such as in an SPI interface. When SDI is tied to DVDD, the device is set in hardware default mode after power on and no software configuration is required. In the simplest case, only three wires SDO, SCLK, and CS\ or FS are needed to interface with the host.

In addition to being a high-speed ADC with versatile control capability, these devices have an on-chip analog multiplexer MUX that can select any analog input or one of three self-test voltages. The sample-and-hold function is automatically started after the fourth SCLK normal sampling or can be controlled by a special pin, CSTART\, to extend the sampling period extended sampling. The normal sampling period can also be programmed as short sampling 12 SCLKs or long sampling 44 SCLKs to accommodate the faster SCLK operation popular among high-performance signal processors. The TLC3574/78 and TLC2574/78 are designed to operate with low-power consumption. The power saving feature is further enhanced with autopower-down mode and programmable conversion speeds. The conversion clock internal OSC is built in. The converter can also use an external SCLK as the conversion clock for maximum flexibility. The TLC3574/78 and TLC2574/78 are specified with bipolar input and a full scale range of ±10 V.