TPS2159

用于 USB 集线器的 3.3V LDO + 双路开关，工作态高电平启用

The TPS2149 incorporates two power distribution switches and an LDO in one small package, providing a USB bus-powered hub power management solution that saves up to 60% in board space over typical implementations.

The TPS2149 meets USB 2.0 bus-powered hub requirements. An integrated LDO regulates the 5-V bus power down to 3.3 V for the USB controller. The two MOSFET switches provide power to the downstream ports. With independent enables, the downstream ports remain unpowered until the hub completes enumeration.

Each power-distribution switch is capable of supplying 200 mA of continuous current, and the independent logic enables are compatible with 5-V logic and 3-V logic. The switches and the LDO are designed with controlled rise times and fall times to minimize current surges.

The TPS2149 has active-low enables while the has active-high enables.

.

Complete Power Management Solution for USB Bus-Powered Hubs

.

3.3-V 200 mA Low-Dropout Voltage Regulator

.

Two 5-V 340-m Typ High-Side MOSFETs

.

Independent Thermal- and Short-Circuit Protection for LDO and Each Switch

.

Overcurrent Indicator With Transient Filter

.

2.9-V to 5.5-V Operating Range

.

CMOS- and TTL-Compatible Enable Inputs

.

75-uA Typ Supply Current

.

Available in 8-Pin MSOP PowerPAD™

.

-40°C to 85°C Ambient Temperature Range

.

APPLICA ONS

.

USB Bus-Powered Hubs

.

Keyboards

.

Monitors

.

Hub Boxes

PowerPAD is a trademark of Texas Instruments.