UCC27324

双 4A 峰值高速低侧电源 MOSFET 驱动器

The UCC2732x and UCC3732x family of high-speed dual-MOSFET Drivers deliver large peak currents into capacitive loads. Three standard logic options are offered – dual-inverting, dual-noninverting, and one-inverting and one-noninverting driver. The thermally enhanced 8-pin PowerPAD MSOP package DGN drastically lowers the thermal resistance to improve long-term reliability. UCC2732x and UCC3732x is also offered in the standard SOIC-8 D or PDIP-8 P packages.

Using a design that inherently minimizes shoot-through current, these drivers deliver 4 A of current where it is needed most at the Miller plateau region during the MOSFET switching transition. A unique BiPolar and MOSFET hybrid output stage in parallel also allows efficient current sourcing and sinking at low supply voltages.

.

Industry-Standard Pin-Out

.

High Current-Drive Capability of ±4 A at the Miller Plateau Region

.

Efficient Constant-Current Sourcing Even at Low Supply Voltages

.

TTL/CMOS Compatible Inputs Independent of Supply Voltage

.

20-ns Typical Rise and 15-ns Typical Fall Times with 1.8-nF Load

.

Typical Propagation-Delay Times of 25 ns with Input Falling and 35 ns with Input Rising

.

4.5-V to 15-V Supply Voltage

.

Supply Current of 0.3 mA

.

Dual Outputs are Paralleled for Higher Drive Current

.

Available in Thermally Enhanced MSOP-PowerPAD™ Package

.

Rated From –40°C to +125°C

.

TrueDrive™ Output Architecture Using Bipolar and CMOS Transistors in Parallel