LT8609BIMSE#PBF

LINEAR TECHNOLOGY LT8609BIMSE#PBF DC-DC Switching Buck Regulator, Adjustable, 3V to 42V in, 0.8V to 41.5V/2A out, 2.2MHz, MSOP-10 New

The from is a 42V, 2A continuous/3A peak output current synchronous step-down regulator in 10 pin MSOP package. It is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 350µA of non switching quiescent current and can deliver 2A of continuous current with peak loads of 3A <1sec. Burst mode operation enables high efficiency down to very low output currents while keeping output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock or spread spectrum modulation for low EMI operation. Internal compensation with peak current mode topology allows use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN UVLO or to shut down the device. It is used in GSM transceivers, general purpose step down and low EMI step down applications.

.

Wide input voltage range from 3V to 42V

.

Capacitor on the TR/SS pin programs the output voltage ramp rate during start-up

.

Accurate 1V enable pin threshold and low dropout

.

High efficiency 2MHz synchronous operation, >93% efficiency at 1A, 5VOUT from 12VIN

.

Peak current mode operation, internal compensation, output soft start and tracking

.

Fast minimum switch-on time of 45ns and minimum off time of 115ns

.

Adjustable and synchronizable frequency range from 200KHz to 2.2MHz

.

Operates in pulse skipping mode only and has fast switch edge speed

.

Allows use of small inductors and VIN quiescent current of 1µA at VEN/UV = 0V

.

Operating temperature range from -40°C to 125°C