资讯详情

OpenCV [c++]（图像处理基础示例程序汇总）

一、图像读取和显示

二、图像预处理[高斯滤波，canny边缘检测、膨胀腐蚀]

Canny边缘检测

三、图像剪裁

四、绘制形状和添加文本

五、透视投影变更矫正

六、颜色检测

七、形状检测和轮廓检测[findContours(),approxPolyDP()]

八、人脸识别

九、虚拟画笔画画

十、文档扫描

十一.车牌区域级联检定位

opencv与VS参考我的另一篇文章：

vs2019 opencv4.3.0 开发环境配置(后续更新)QT与OpenCV配置）_NCUTer的博客-CSDN博客

一、图像读取和显示

#include<opencv2/opencv.hpp> #include<iostream>   using namespace cv; using namespace std;   int main() {  string path = "Resources/lambo.png";//图片的路径名  Mat img = imread(path);///图像加载后赋值img中     //if (path.empty()) { cout << "file not loaded" << endl; }     //检查文件是否打开 打开时执行打印语句     //namedWindow("Image", WINDOW_FREERATIO);创建一个名字Image可调窗口  imshow("Image", img);///创建一个显示图像的窗口img  waitKey(0)//不断刷新图像  return 0; }
  • waitKey()函数的功能是不断刷新图像，频率为delay，单位是ms。
  • delay这一帧将始终显示为0。
  • delay不为0时，则在显示完一帧图像后程序等待“delay"ms再次显示下一帧图像。

二、图像预处理[高斯滤波，canny边缘检测、膨胀腐蚀]

#include <opencv2/opencv.hpp> #include <iostream>   using namespace cv; using namespace std;   void main() {    string path = "Resources/test.png";  Mat img = imread(path);  Mat imgGray,imgBlur,imgCanny,imgDil,imgErode;  ///将照片转换为灰度  cvtColor(img, imgGray, COLOR_BGR2GRAY);  ///高斯模糊  GaussianBlur(imgGray, imgBlur, Size(3, 3), 3, 0);  //Canny边缘检测器  一般在使用Canny边缘检测器之前会做一些模糊处理  Canny(imgBlur, imgCanny, 25, 75);  ///创建一个可以使用膨胀的核心  Mat kernel = getStructuringElement(MORPH_RECT, Size(3, 3));  //图像膨胀  dilate(imgCanny, imgDil, kernel);  ///图像侵蚀  erode(imgDil, imgErode, kernel);     //结果呈现  imshow("Image", img);  imshow("Image Gray", imgGray);  imshow("Image Blur", imgBlur);  imshow("Image Canny", imgCanny);  imshow("Image Dilation", imgDil);  imshow("Image Erode", imgErode);    waitKey(0); }

Canny边缘检测

    Canny(imgBlur, imgCanny, 25, 75);

第三和第四个参数分别代表底阈值和高阈值，其中底阈值通常是高阈值的1/2或1/3

三、图像剪裁

#include <opencv2/opencv.hpp> #include <iostream>   using namespace cv; using namespace std;   void main() {    string path = "Resources/test.png";  Mat img = imread(path);  Mat imgResize,imgCrop;  ///调整图像大小  //cout << img.size() << endl;////查看原图像的大小  //resize(img, imgResize, Size(640, 480)；//按自定义的宽度和高度缩放  resize(img, imgResize, Size(),0.5,0.5)///按比例缩放  ///图像切割  Rect roi(200, 100, 300, 300);     //前两个参数是距离左上原点的x方向和y方向的距离，后两个参数是延伸的x，y长度  imgCrop = img(roi);    imshow("Image", img);  imshow("Image Resize", imgResize);  imshow("Image Crop", imgCrop);  waitKey(0);   }

void cv::resize(InputArray src, OutputArray dst, Size dsize, double fx=0, double fy=0, int interpolation = INTER_LINEAR) 调整图像的大小。 resize 将图像 src 尺寸缩小到或最大到指定尺寸。请注意，不要考虑初始尺寸 dst 类型或大小。相反，大小和类型是从 src、dsize、fx fy 派生的。

 四、绘制形状和添加文本

#include <opencv2/opencv.hpp>
#include <iostream>

using namespace cv;
using namespace std;

int main()
{
	//Blank Image
	Mat img(512, 512, CV_8UC3, Scalar(255, 255, 255));

	circle(img, Point(256, 256), 155, Scalar(0, 69, 255), FILLED);
	rectangle(img, Point(130, 226), Point(382, 286), Scalar(255, 255, 255), -1);
	line(img, Point(130, 296), Point(382, 296), Scalar(255, 255, 255), 2);

	putText(img, "Murtaza's Workshop", Point(137, 262), FONT_HERSHEY_DUPLEX, 0.95, Scalar(0, 69, 255), 2);

	imshow("Image", img);
	waitKey(0);

	return 0;
}

 五、透视投影变换矫正

#include <opencv2/opencv.hpp>
#include <iostream>
 
using namespace cv;
using namespace std;
 
float w = 250, h = 350;
Mat matrix, imgWarp;
// 透视变换
void main() {
 
	string path = "card.jpg";
	Mat img = imread(path);
 
	Point2f src[4] = { {529,142},{771,190},{405,395},{674,457} };
	Point2f dst[4] = { {0.0f,0.0f},{w,0.0f},{0.0f,h},{w,h} };
 
	matrix = getPerspectiveTransform(src, dst);//获取透视变换矩阵
    //src为源图像四边形顶点坐标，dst为目标图像对应的四边形顶点坐标
	warpPerspective(img, imgWarp, matrix, Point(w, h));
    //参数分别为 输入图像，输出图像，透视变换矩阵，图像大小
 
	for (int i = 0; i < 4; i++)
	{
		circle(img, src[i], 10, Scalar(0, 0, 255), FILLED);
	}//在原图像中标记目标顶点
 
	imshow("Image", img);
	imshow("Image Warp", imgWarp);
 
	waitKey(0);
}

 六、颜色检测

#include <opencv2/opencv.hpp>
#include <iostream>
 
using namespace cv;
using namespace std;
 
Mat imgHSV,mask;
int hmin = 0, smin = 0, vmin = 0;
int hmax =179, smax = 255, vmax = 255;
 
void main() {
 
	string path = "temp.png";
	Mat img = imread(path);
	cvtColor(img, imgHSV, COLOR_BGR2HSV);
    //HSV颜色空间  H（色调）：0~180  S（饱和度）：0~255  V（亮度）：0~255
 
	namedWindow("Trackbars", (640, 200));//创建一个名为Trackbars的窗口，大小为640*200
	createTrackbar("Hue Min", "Trackbars", &hmin, 179);
	createTrackbar("Hue Max", "Trackbars", &hmax, 179);
	createTrackbar("Sat Min", "Trackbars", &smin, 255);
	createTrackbar("Sat Max", "Trackbars", &smax, 255);
	createTrackbar("Val Min", "Trackbars", &vmin, 255);
	createTrackbar("Val Max", "Trackbars", &vmax, 255);
    //createTrackbar函数是创建轨迹条，
    //4个参数分别是 轨迹条名字，输出的窗口，一个指向整数的指针来表示当前的值，可到达的最大值
 
	while (true)
	{
		//检测我们所要的颜色 设置一个遮罩 在范围内的颜色
		Scalar lower(hmin, smin, vmin);//HSV范围最低值
		Scalar upper(hmax, smax, vmax);//HSV范围最高值
		inRange(imgHSV, lower, upper, mask);//输入，低值，高值，输出
//inRange是将在阈值区间内的像素值设置为白色（255），而不在阈值区间内的像素值设置为黑色（0）
 
		imshow("Image", img);
		imshow("Image HSV", imgHSV);
		imshow("Image Mask", mask);
 
		waitKey(1);
	}
}

检查数组元素是否位于其他两个数组的元素之间。

 七、形状检测和轮廓检测[findContours(),approxPolyDP()]

#include <opencv2/opencv.hpp>
#include <iostream>
 
using namespace cv;
using namespace std;
 
Mat imgGray, imgBlur, imgCanny, imgDil, imgErode;
//定义一个轮廓处理函数
void getContours(Mat imgDil,Mat img) {
 
	vector<vector<Point>> contours;//{ {Point(20,30),Point(50,60)},{}, {}}
	vector<Vec4i>hierarchy;//vector里放置了四个int类型的变量
	findContours(imgDil, contours, hierarchy, RETR_EXTERNAL, CHAIN_APPROX_SIMPLE);
	//drawContours(img, contours, -1, Scalar(255, 0, 255), 2);
	vector<vector<Point>>conPoly(contours.size());
	vector<Rect> boundRect(contours.size());
	
	for (int i = 0; i < contours.size(); i++)
	{
		int area = contourArea(contours[i]);
		cout << area << endl;//需要正确过滤的面积（过滤噪点）
 
		string objectType;
        //判断形状
		if (area>1000)
		{
			float peri = arcLength(contours[i], true);
			approxPolyDP(contours[i], conPoly[i], 0.02 * peri, true);//找到近似值
			
			cout << conPoly[i].size() << endl;
			boundRect[i] = boundingRect(conPoly[i]);//边界矩形
			
			int objCor = (int)conPoly[i].size();
 
			if (objCor == 3) { objectType = "Tri"; }
			if (objCor == 4) { 
				
				float aspRatio = (float)boundRect[i].width / (float)boundRect[i].height;
				cout << aspRatio << endl;
				if (aspRatio > 0.95 && aspRatio < 1.05) { objectType = "Square"; }
				else { objectType = "Rect"; 
				}
			}
			if (objCor > 4) { objectType = "Circle"; }
 
			drawContours(img, conPoly, i, Scalar(255, 0, 255), 2);//描绘计数轮廓
			rectangle(img, boundRect[i].tl(), boundRect[i].br(), Scalar(0, 255, 0), 5);//绘制边界矩形
			//打印图形的名字
			putText(img, objectType, { boundRect[i].x,boundRect[i].y - 5 }, FONT_HERSHEY_PLAIN, 1, Scalar(0, 69, 255), 2);
		}
	}
}
 
void main() {
 
	string path = "temp.png";
	Mat img = imread(path);
 
//图像的预处理
	//1.将照片转换为灰度
	cvtColor(img, imgGray, COLOR_BGR2GRAY);
	//2.高斯模糊
	GaussianBlur(imgGray, imgBlur, Size(3, 3), 3, 0);
	//3.Canny边缘检测器
	Canny(imgBlur, imgCanny, 25, 75);
	//4.创建一个可以使用膨胀的内核
	Mat kernel = getStructuringElement(MORPH_RECT, Size(3, 3));
	//5.图像膨胀
	dilate(imgCanny, imgDil, kernel);
 
	getContours(imgDil,img);
 
	imshow("Image", img);
 
	waitKey(0);
}

  八、人脸识别

#include <opencv2/opencv.hpp>
#include <iostream>
 
using namespace cv;
using namespace std;
 
void main() {
 
	string path = "test.png";
	Mat img = imread(path);
 
	CascadeClassifier faceCascade;//创建级联分类器
    //载入训练模型
	faceCascade.load("Resources/haarcascade_frontalface_default.xml");
 
	if(faceCascade.empty()){cout<<"XML file not loaded"<<endl; }
    //检查文件是否打开 没打开时执行打印语句
 
	vector<Rect>faces;//创建人脸存放的vector
	faceCascade.detectMultiScale(img, faces, 1.1, 10);
//detectMultiScale函数可以检测出图片中所有的人脸，并用vector保存各个人脸的坐标、大小
 
    //在原图像中画出人脸矩形边框
	for (int i = 0; i < faces.size(); i++)
	{
		rectangle(img, faces[i].tl(),faces[i].br(), Scalar(255, 0, 255), 3);
	}
 
	imshow("Image", img);
 
	waitKey(0);
}

九、虚拟画笔作画

#include <opencv2/opencv.hpp>
#include <iostream>
using namespace cv;
using namespace std;

int main()
{
	VideoCapture cap(1);
	Mat img;
	Mat imgHSV, mask, imgColor;
	int hmin = 0, smin = 0, vmin = 0;
	int hmax = 179, smax = 255, vmax = 255;

	namedWindow("Trackbars", (640, 200)); // Create Window
	createTrackbar("Hue Min", "Trackbars", &hmin, 179);
	createTrackbar("Hue Max", "Trackbars", &hmax, 179);
	createTrackbar("Sat Min", "Trackbars", &smin, 255);
	createTrackbar("Sat Max", "Trackbars", &smax, 255);
	createTrackbar("Val Min", "Trackbars", &vmin, 255);
	createTrackbar("Val Max", "Trackbars", &vmax, 255);

	while (true) {

		cap.read(img);
		cvtColor(img, imgHSV, COLOR_BGR2HSV);

		Scalar lower(hmin, smin, vmin);
		Scalar upper(hmax, smax, vmax);

		inRange(imgHSV, lower, upper, mask);
		// hmin, smin, vmin, hmax, smax, vmax;
		cout << hmin << ", " << smin << ", " << vmin << ", " << hmax << ", " << smax << ", " << vmax << endl;
		imshow("Image", img);
		imshow("Mask", mask);
		waitKey(1);
	}
}

#include <opencv2/opencv.hpp>
#include <iostream>

using namespace cv;
using namespace std;

Mat img;
vector<vector<int>> newPoints;

vector<vector<int>> myColors{ {124, 48, 117, 143, 170, 255}, //purple
								{68, 72, 156, 102, 126, 255} }; //green

vector<Scalar> myColorValues{ {255, 0, 255}, //purple
								{0, 255, 0} }; //green

Point getContours(Mat imgDil) {

	vector<vector<Point>> contours; //轮廓数据
	vector<Vec4i> hierarchy;

	findContours(imgDil, contours, hierarchy, RETR_EXTERNAL, CHAIN_APPROX_SIMPLE); //通过预处理的二值图像找到所有轮廓contours
	//drawContours(img, contours, -1, Scalar(255, 0, 255), 2); //绘制所有轮廓(不滤除噪声)
	vector<vector<Point>> conPoly(contours.size());
	vector<Rect> boundRect(contours.size());
	Point myPoint(0, 0);

	for (int i = 0; i < contours.size(); i++)
	{
		double area = contourArea(contours[i]); //计算每个轮廓区域
		cout << area << endl;

		if (area > 1000) //过滤噪声
		{
			//找轮廓的近似多边形或曲线
			double peri = arcLength(contours[i], true);
			approxPolyDP(contours[i], conPoly[i], 0.02 * peri, true);

			cout << conPoly[i].size() << endl;
			boundRect[i] = boundingRect(conPoly[i]); //找每个近似曲线的最小上边界矩形
			myPoint.x = boundRect[i].x + boundRect[i].width / 2;
			myPoint.y = boundRect[i].y;

			//drawContours(img, conPoly, i, Scalar(255, 0, 255), 2); //绘制滤除噪声后的所有轮廓
			//rectangle(img, boundRect[i].tl(), boundRect[i].br(), Scalar(0, 255, 0), 5); //绘制边界框
		}
	}
	return myPoint; //返回矩形框上边界中点坐标
}

vector<vector<int>> findColor(Mat img)
{
	Mat imgHSV, mask;
	cvtColor(img, imgHSV, COLOR_BGR2HSV);

	for (int i = 0; i < myColors.size(); i++) 
	{
		Scalar lower(myColors[i][0], myColors[i][1], myColors[i][2]);
		Scalar upper(myColors[i][3], myColors[i][4], myColors[i][5]);
		inRange(imgHSV, lower, upper, mask);
		//imshow(to_string(i), mask);
		Point myPoint = getContours(mask); //根据mask得到检测到当前颜色矩形框的上边界中点坐标

		if (myPoint.x != 0 && myPoint.y != 0) 
		{
			newPoints.push_back({ myPoint.x, myPoint.y, i }); //得到当前帧检测颜色的目标点
		}
	}
	return newPoints;
}

void drawOnCanvas(vector<vector<int>> newPoints, vector<Scalar> myColorValues)
{
	for (int i = 0; i < newPoints.size(); i++) 
	{
		circle(img, Point(newPoints[i][0], newPoints[i][1]), 10, myColorValues[newPoints[i][2]], FILLED);
	}
}

int main()
{
	VideoCapture cap(0);

	while (true) 
	{
		cap.read(img);
		newPoints = findColor(img);
		drawOnCanvas(newPoints, myColorValues);

		imshow("Canvas Img", img);
		waitKey(1);
	}

	return 0;
}

 

十、文档扫描

#include <opencv2/imgcodecs.hpp>
#include <opencv2/highgui.hpp>
#include <opencv2/imgproc.hpp>
#include <iostream>

using namespace cv;
using namespace std;

Mat imgOriginal, imgGray, imgBlur,imgCanny, imgThre, imgDil, imgErode, imgWarp, imgCrop;
vector<Point> initialPoints, docPoints;

float w = 420, h = 596;


Mat preProcessing(Mat img)
{
	cvtColor(img, imgGray, COLOR_BGR2GRAY); 
	GaussianBlur(imgGray, imgBlur, Size(3, 3), 3, 0); 
	Canny(imgBlur, imgCanny, 25, 75); 

	Mat kernel = getStructuringElement(MORPH_RECT, Size(3, 3));
	dilate(imgCanny, imgDil, kernel);
	//erode(imgDil, imgErode, kernel);
	return imgDil;
}

vector<Point> getContours(Mat imgDil) {

	vector<vector<Point>> contours; //轮廓数据
	vector<Vec4i> hierarchy;

	findContours(imgDil, contours, hierarchy, RETR_EXTERNAL, CHAIN_APPROX_SIMPLE); //通过预处理的二值图像找到所有轮廓contours
	//drawContours(img, contours, -1, Scalar(255, 0, 255), 2); //绘制所有轮廓(不滤除噪声)
	vector<vector<Point>> conPoly(contours.size());
	vector<Point> biggest;
	int maxArea = 0;

	for (int i = 0; i < contours.size(); i++)
	{
		double area = contourArea(contours[i]); //计算每个轮廓区域
		cout << area << endl;

		if (area > 1000) //过滤噪声
		{
			//找轮廓的近似多边形或曲线
			double peri = arcLength(contours[i], true);
			approxPolyDP(contours[i], conPoly[i], 0.02 * peri, true);

			if (area > maxArea && conPoly[i].size() == 4) {

				//drawContours(imgOriginal, conPoly, i, Scalar(255, 0, 255), 5); //绘制滤除噪声后的所有轮廓
				biggest = { conPoly[i][0], conPoly[i][1], conPoly[i][2], conPoly[i][3] };
				maxArea = area;

			}
		}
	}
	return biggest; //返回最大轮廓四个点的坐标
}

void drawPoints(vector<Point> points, Scalar color)
{
	for (int i = 0; i < points.size(); i++) 
	{
		circle(imgOriginal, points[i], 10, color, FILLED);
		putText(imgOriginal, to_string(i), points[i], FONT_HERSHEY_PLAIN, 4, color, 4);
	}
}

vector<Point> reorder(vector<Point> points)
{
	vector<Point> newPoints;
	vector<int> sumPoints, subPoints;

	for (int i = 0; i < 4; i++) 
	{
		sumPoints.push_back(points[i].x + points[i].y);
		subPoints.push_back(points[i].x - points[i].y);
	}

	newPoints.push_back(points[min_element(sumPoints.begin(), sumPoints.end()) - sumPoints.begin()]); //0
	newPoints.push_back(points[max_element(subPoints.begin(), subPoints.end()) - subPoints.begin()]); //1
	newPoints.push_back(points[min_element(subPoints.begin(), subPoints.end()) - subPoints.begin()]); //2
	newPoints.push_back(points[max_element(sumPoints.begin(), sumPoints.end()) - sumPoints.begin()]); //3

	return newPoints;
}

Mat getWarp(Mat img, vector<Point> points, float w, float h)
{
	Point2f src[4] = { points[0], points[1], points[2], points[3] };
	Point2f dst[4] = { {0.0f, 0.0f}, {w, 0.0f}, {0.0f, h}, {w, h} };

	Mat matrix = getPerspectiveTransform(src, dst);
	warpPerspective(img, imgWarp, matrix, Point(w, h));
	return imgWarp;
}


int main()
{
	string path = "paper.jpg";
	imgOriginal = imread(path);
	//resize(imgOriginal, imgOriginal, Size(), 0.5, 0.5);

	//Preprocessing
	imgThre = preProcessing(imgOriginal);
	//Get Contours - Biggest
	initialPoints = getContours(imgThre);
	//drawPoints(initialPoints, Scalar(0, 0, 255));
	docPoints = reorder(initialPoints);
	//drawPoints(docPoints, Scalar(0, 255, 0));

	//Warp
	imgWarp = getWarp(imgOriginal, docPoints, w, h);

	//Crop
	int cropValue = 5;
	Rect roi(cropValue, cropValue, w - (2 * cropValue), h - (2 * cropValue));
	imgCrop = imgWarp(roi);

	imshow("Image", imgOriginal);
	imshow("Image Dilation", imgThre);
	imshow("Image Warp", imgWarp);
	imshow("Image Crop", imgCrop);
	waitKey(0);

	return 0;
}

 十一.车牌区域级联检测定位

#include <opencv2/opencv.hpp>
#include <iostream>

using namespace cv;
using namespace std;

int main()
{
	VideoCapture cap(0);
	Mat img;

	CascadeClassifier plateCascade;
	plateCascade.load("haarcascade_russian_plate_number.xml");

	if (plateCascade.empty()) { cout << "XML file not loaded" << endl; }

	vector<Rect> plates;

	while (true) {

		cap.read(img);

		plateCascade.detectMultiScale(img, plates, 1.1, 10);

		for (int i = 0; i < plates.size(); i++)
		{
			Mat imgCrop = img(plates[i]);
			imshow(to_string(i), imgCrop);
			imwrite("车牌.png", imgCrop);
			rectangle(img, plates[i].tl(), plates[i].br(), Scalar(0, 0, 255), 3);
		}

		imshow("Image", img);
		waitKey(1);
	}
	return 0;
}

标签： 卡边缘连接器card

锐单商城拥有海量元器件数据手册、 IC替代型号，打造 电子元器件IC百科大全！

锐单商城 - 一站式电子元器件采购平台