虚拟机配置服务器开发环境
- 虚拟机配置服务器开发环境
-
- 配备虚拟机服务器
-
- 配置虚拟机网络
- 虚拟机CentOS网络配置
- 虚拟机CentOS开发环境
-
- 安装配置SSH
- 换源
- 安装Docker与部署容器
-
- 1.安装Docker
- 2.安装Docker-Compose
- 3.安装Docker应用
-
- 3.1安装Portainer
- 3.2安装Nginx
- 3.3安装Redis
- 3.4安装MySQL
- 3.5安装Elasticsearch
- 3.6安装kibana
- 3.7安装Logstash
- 3.8安装ElasticSearch-head
- 3.9安装RabbitMQ
- 本机安装JDK
- systemctl和防火墙firewalld命令
虚拟机配置服务器开发环境
不断更新学习
配备虚拟机服务器
配置虚拟机网络
虚拟机网络可根据截图配置。虚拟机的网络模式是百度
配置虚拟机网络模式及其子网络IP、子网掩码、DHCP设置
配置NAT，网关IP 或者 系统安装后IP端口映射
虚拟机CentOS网络配置
-
进入目录
cd /etc/sysconfig/network-scripts/-rw-r--r--. 1 root root 381 2月 7 21:30 ifcfg-ens33 # ifcfg-ens 网络配置文件一般在开头，根据您的网卡设备确定 有几个ifcfg-ens -rw-r--r--. 1 root root 254 5月 22 2020 ifcfg-lo lrwxrwxrwx. 1 root root 24 2月 7 19:28 ifdown -> ../../../usr/sbin/ifdown -rwxr-xr-x. 1 root root 654 5月 22 2020 ifdown-bnep -rwxr-xr-x. 1 root root 6532 5月 22 2020 ifdown-eth -rwxr-xr-x. 1 root root 781 5月 22 2020 ifdown-ippp -rwxr-xr-x. 1 root root 4540 5月 22 2020 ifdown-ipv6 lrwxrwxrwx. 1 root root 11 2月 7 19:28 ifdown-isdn -> ifdown-ippp -rwxr-xr-x. 1 root root 2130 5月 22 2020 ifdown-post -rwxr-xr-x. 1 root root 1068 5月 22 2020 ifdown-ppp -rwxr-xr-x. 1 root root 870 5月 22 2020 ifdown-routes -rwxr-xr-x. 1 root root 1456 5月 22 2020 ifdown-sit -rwxr-xr-x. 1 root root 1621 12月 9 2018 ifdown-Team -rwxr-xr-x. 1 root root 1556 12月 9 2018 ifdown-TeamPort -rwxr-xr-x. 1 root root 1462 5月 22 2020 ifdown-tunnel lrwxrwxrwx. 1 root root 22 2月 7 19:28 ifup -> ../../../usr/sbin/ifup -rwxr-xr-x. 1 root root 12415 5月 22 2020 ifup-aliases -rwxr-xr-x. 1 root root 910 5月 22 2020 ifup-bnep -rwxr-xr-x. 1 root root 13758 5月 22 2020 ifup-eth -rwxr-xr-x. 1 root root 12075 5月 22 2020 ifup-ippp -rwxr-xr-x. 1 root root 11893 5月 22 2020 ifup-ipv6 lrwxrwxrwx. 1 root root 9 2月 7 19:28 ifup-isdn -> ifup-ippp -rwxr-xr-x. 1 root root 650 5月 22 2020 ifup-plip -rwxr-xr-x. 1 root root 1064 5月 22 2020 ifup-plusb -rwxr-xr-x. 1 root root 4997 5月 22 2020 ifup-post -rwxr-xr-x. 1 root root 4154 5月 22 2020 ifup-ppp -rwxr-xr-x. 1 root root 2001 5月 22 2020 ifup-routes -rwxr-xr-x. 1 root root 3303 5月 22 2020 ifup-sit -rwxr-xr-x. 1 root root 1755 12月 9 2018 ifup-Team -rwxr-xr-x. 1 root root 1876 12月 9 2018 ifup-TeamPort -rwxr-xr-x. 1 root root 2780 5月 22 2020 ifup-tunnel -rwxr-xr-x. 1 root root 1836 5月 22 2020 ifup-wireless -rwxr-xr-x. 1 root root 5419 5月 22 2020 init.ipv6-global -rw-r--r--. 1 root root 20678 5月 22 2020 network-functions -rw-r--r--. 1 root root 30988 5月 22 2020 network-functions-ipv6 -
编辑网络配置文件
vi ifcfg-ens33配置信息结合虚拟机网络配置
TYPE=Ethernet PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=static # dhcp改为static DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no IPV6_ADDR_GEN_MODE=stable-privacy NAME=ens33 UUID=d163b238-24cb-4c77-a59e-6ef020159add DEVICE=ens33 ONBOOT=yes # 开机启动本机配置 IPADDR=192.168.56.10 # 静态IP NETMASK=255.255.255.0 # 子网掩码 GATEWAY=192.168.56.100 # 默认网关 DNS1=192.168.56.100 # DNS 配置 DNS2=8.8.8.8 -
配置生效
systemctl restart network # 或 service network restart -
测试
ping www.baidu.com[root@localhost network-scripts]# ping www.baidu.com PING www.a.shifen.com (110.242.68.3) 56(84) bytes of data. 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=1 ttl=128 time=32.8 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=2 ttl=128 time=30.8 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=3 ttl=128 time=31.3 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=4 ttl=128 time=29.1 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=5 ttl=128 time=31.2 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=6 ttl=128 time=27.4 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=7 ttl=128 time=33.0 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=8 ttl=128 time=35.7 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=9 ttl=128 time=29.1 ms 64 bytes from 110.242.68.3 (110.242.68.3): icmp_seq=10 ttl=128 time=28.9 ms ^C --- www.a.shifen.com ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 9016ms rtt min/avg/max/mdev = 27.492/30.978/35.795/2.329 ms
虚拟机CentOS开发环境
安装配置SSH
-
查看是否安装SSH
yum list installed | grep openssh-server # 或者 rpm -qa | grep ssh -
安装SSH(未安装情况)
yum install openssh-server -
编辑ssh配置文件
vi /etc/ssh/sshd_config# SSH 开放端口 Port 22 # SSH 监听IP ListenAddress 0.0.0.0 ListenAddress :: # 允许Puke登录 PubkeyAuthentication yes # Key保存文件名 AuthorizedKeysFile .ssh/authorized_keys # 允许Root登录 PermitRootLogin yes # 允许使用密码登录 PasswordAuthentication yes -
检查SSH是否运行
ps -e | grep sshd # 或者查看端口状态 netstat -an | grep 22 # 或者查看服务运行状态 systemctl status sshd.service -
启用ssh服务
service sshd restart #重启ssh服务 service sshd start #启动ssh服务 -
开机启动ssh服务
systemctl enable sshd #开机启动sshd服务 systemctl list-unit-files |grep ssh #检查是否开机启动 systemctl stop sshd #停止sshd服务 systemctl disable sshd #禁用开机启动sshd服务 -
防火墙打开22端口
firewall-cmd --zone=public --add-port=22/tcp --permanent #向防火墙中添加端口 --zone #作用域 --add-port=80/tcp #添加端口，格式为：端口/通讯协议 --permanent #永久生效 firewall-cmd --reload #使防火墙规则生效 firewall-cmd --zone=public --query-port=22/tcp #查看端口是否添加成功: firewall-cmd --list-ports #查看防火墙开放的端口
换源
-
安装wget
yum install wget -y -
备份源文件
mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.bak -
下载源文件并命名阿里源
wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo -
清理并生成新缓存
yum clean all && yum makecache已加载插件：fastestmirror 正在清理软件源： base epel extras updates Cleaning up list of fastest mirrors 已加载插件：fastestmirror Determining fastest mirrors * base: mirrors.aliyun.com * extras: mirrors.aliyun.com * updates: mirrors.aliyun.com base | 3.6 kB 00:00:00 epel | 4.7 kB 00:00:00 extras | 2.9 kB 00:00:00 updates | 2.9 kB 00:00:00 base/7/x86_64/primary_db FAILED http://mirrors.cloud.aliyuncs.com/centos/7/os/x86_64/repodata/6d0c3a488c282fe537794b5946b01e28c7f44db79097bb06826e1c0c88bad5ef-primary.sqlite.bz2: [Errno 14] curl#6 - "Could not resolve host: mirrors.cloud.aliyuncs.com; Unknown error" 正在尝试其它镜像。 (1/16): epel/x86_64/group_gz | 96 kB 00:00:00 (2/16): base/7/x86_64/group_gz | 153 kB 00:00:00 (3/16): epel/x86_64/updateinfo | 1.1 MB 00:00:02 (4/16): epel/x86_64/prestodelta | 862 B 00:00:00 (5/16): base/7/x86_64/other_db | 2.6 MB 00:00:06 (6/16): epel/x86_64/primary_db | 7.0 MB 00:00:14 base/7/x86_64/filelists_db FAILED ] 928 kB/s | 21 MB 00:00:50 ETA http://mirrors.aliyuncs.com/centos/7/os/x86_64/repodata/d6d94c7d406fe7ad4902a97104b39a0d8299451832a97f31d71653ba982c955b-filelists.sqlite.bz2: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connection refused" 正在尝试其它镜像。 (7/16): extras/7/x86_64/other_db | 148 kB 00:00:00 (8/16): epel/x86_64/other_db | 3.4 MB 00:00:07 (9/16): epel/x86_64/filelists_db | 12 MB 00:00:28 extras/7/x86_64/primary_db FAILED ============= ] 995 kB/s | 40 MB 00:00:26 ETA http://mirrors.aliyuncs.com/centos/7/extras/x86_64/repodata/68cf05df72aa885646387a4bd332a8ad72d4c97ea16d988a83418c04e2382060-primary.sqlite.bz2: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connection refused" 正在尝试其它镜像。 extras/7/x86_64/filelists_db FAILED http://mirrors.aliyuncs.com/centos/7/extras/x86_64/repodata/ceff3d07ce71906c0f0372ad5b4e82ba2220030949b032d7e63b7afd39d6258e-filelists.sqlite.bz2: [Errno 14] curl#7 - "Failed connect to mirrors.aliyuncs.com:80; Connection refused" 正在尝试其它镜像。 (10/16): updates/7/x86_64/filelists_db | 9.1 MB 00:00:19 (11/16): extras/7/x86_64/primary_db | 247 kB 00:00:00 (12/16): extras/7/x86_64/filelists_db | 277 kB 00:00:00 (13/16): updates/7/x86_64/other_db | 1.1 MB 00:00:02 (14/16): base/7/x86_64/primary_db | 6.1 MB 00:00:13 (15/16): base/7/x86_64/filelists_db | 7.2 MB 00:00:15 (16/16): updates/7/x86_64/primary_db | 16 MB 00:00:35 元数据缓存已建立
安装Docker与部署容器
1.安装Docker
-
通过脚本进行安装
curl -fsSL https://get.docker.com -o get-docker.sh && sudo sh get-docker.sh -
启动Docker
sudo systemctl enable docker.service && sudo systemctl enable containerd.service sudo systemctl start docker -
检查Docker是否启动
docker ps
2.安装Docker-Compose
-
下载docker-compose
sudo curl -L "https://github.com/docker/compose/releases/download/2.6.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose -
更改docker-compose权限
sudo chmod +x /usr/local/bin/docker-compose
3.安装Docker应用
docker-compose.yml公共部分version: '2.4' networks: app_start: driver: bridge ipam: config: - subnet: 172.18.0.0/16 #CIDR 格式的子网，代表一个网段 ip_range: 172.18.0.0/24 #分配容器 IP 的 IP 范围 gateway: 172.18.0.1 #主子网的 IPv4 或 IPv6 网关 services: # 应用容器映射配置执行
docker-compose在/home/app_start中进行
3.1安装Portainer
-
创建目录
mkdir -p ../build/portainer/data && mkdir -p ../build/portainer/public -
编写docker-compose.yml配置
portainer: restart: always container_name: portainer image: portainer/portainer ports: - "8000:8000" - "9000:9000" volumes: - "/var/run/docker.sock:/var/run/docker.sock" - "/home/app_start/build/portainer/data:/data" #- "/home/app_start/build/portainer/public:/public" networks: app_start: ipv4_address: 172.18.0.2 -
拉取安装Portainer
docker-compose up -d portainer -
访问Portainer，设置密码
初次访问，进去网页就是设置密码，根据需求设置Portainer
http://部署容器IP地址:9000 -
汉化Portainer
-
下载汉化包
curl -o /home/app_start/build/portainer/public.tar -L "https://data.smallblog.cn/blog-images/back/public.tar" sudo tar -vxf /home/app_start/build/portainer/public.tar -C /home/app_start/build/portainer/ -
修改docker-compose.ym，去掉注释
- "/home/app_start/build/portainer/public:/public" -
重启部署
docker-compose up -d portainer -
重启访问浏览器，登录
-
3.2安装Nginx
-
创建目录
mkdir -p ./build/nginx && mkdir -p ./build/nginx/log && mkdir -p ./build/nginx/www -
编写docker-compose.yml配置
nginx: image: nginx restart: always container_name: nginx environment: - TZ=Asia/Shanghai ports: - "80:80" - "443:443" volumes: - /home/app_start/build/nginx/conf.d:/etc/nginx/conf.d - /home/app_start/build/nginx/log:/var/log/nginx - /home/app_start/build/nginx/www:/etc/nginx/html - /etc/letsencrypt:/etc/letsencrypt networks: app_start: ipv4_address: 172.18.0.6 -
启动一个临时的Nginx容器
docker run -p 80:80 --name nginx_test -d nginx -
将临时容器中的配置Copy到创建的目录中
docker container cp nginx_test:/etc/nginx /home/app_start/build查看容器Copy到目录的内容
ls /home/app_start/build/nginx #------------------------------------ conf.d fastcgi_params log mime.types modules nginx.conf scgi_params uwsgi_params www -
停掉临时容器，启动构建正确的容器
docker stop nginx_test docker-compose up -d nginx -
访问浏览器，测试是否启动成功
http://部署容器IP地址:80
3.3安装Redis
-
创建目录
mkdir -p ./build/redis/data && mkdir -p ./build/redis/conf && mkdir -p ./build/redis/logs -
下载Redis配置文件
curl -o /home/app_start/build/redis/conf/redis.conf -L "https://gitee.com/grocerie/centos-deployment/raw/master/redis.conf" -
编写docker-compose.yml配置
redis: restart: always image: redis container_name: redis volumes: - "/home/app_start/build/redis/data:/data" - "/home/app_start/build/redis/conf:/usr/local/etc/redis" - "/home/app_start/build/redis/logs:/logs" command: # 两个写入操作 只是为了解决启动后警告 可以去掉，123456 为密码 redis-server --requirepass 123456 --appendonly yes ports: - 6379:6379 environment: - TZ=Asia/Shanghai networks: app_start: ipv4_address: 172.18.0.5 -
构建启动容器
docker-compose up -d redis -
启动后测试连接Redis
3.4安装MySQL
-
创建目录
mkdir -p ./build/mysql/data -
编写docker-compose.yml配置
mysql: image: mysql restart: always container_name: "mysql" ports: - 3306:3306 volumes: - "/home/app_start/build/mysql/data:/var/lib/mysql" command: --default-authentication-plugin=mysql_native_password --character-set-server=utf8mb4 --collation-server=utf8mb4_general_ci --explicit_defaults_for_timestamp=true --lower_case_table_names=1 --default-time-zone=+8:00 environment: MYSQL_ROOT_PASSWORD: "12345678" networks: app_start: ipv4_address: 172.18.0.4 -
启动后测试连接MySQL
3.5安装Elasticsearch
-
创建目录
mkdir -p ./build/elasticsearch/config && mkdir -p ./build/elasticsearch/data && mkdir -p ./build/elasticsearch/plugins -
编写配置文件
# 表示elasticsearch允许远程的任何机器调用 >>: 写入 echo "http.host: 0.0.0.0" >> /home/app_start/build/elasticsearch/config/elasticsearch.yml -
对目录进行权限升级
chmod -R 777 /home/app_start/build/elasticsearch -
编写docker-compose.yml配置
elasticsearch: container_name: elasticsearch image: docker.io/elasticsearch:7.4.2 environment: - discovery.type=single-node - ES_JAVA_OPTS=-Xms64m -Xmx512m volumes: - /home/app_start/build/elasticsearch/config/elasticsearch.yml:/usr/share/elasticsearch/config/elasticsearch.yml - /home/app_start/build/elasticsearch/data:/usr/share/elasticsearch/data - /home/app_start/build/elasticsearch/plugins:/usr/share/elasticsearch/plugins ports: - "9200:9200" - "9300:9300" networks: app_start: ipv4_address: 172.18.0.20 restart: always -
启动后浏览器访问
http://部署容器IP地址:9200/ -
Elasticsearch 安装 IK分词器
-
进入Elasticsearch挂载目录
cd /home/app_start/build/elasticsearch -
下载IK分词器
# 下载ik7.4.2 wget https://github.com/medcl/elasticsearch-analysis-ik/releases/download/v7.4.2/elasticsearch-analysis-ik-7.4.2.zip # 下载unzip yum install unzip -y # 用unzip解压ik unzip elasticsearch-analysis-ik-7.4.2.zip -d ik # 移动到plugins目录下 mv ik plugins/ # 分配权限 chmod -R 777 plugins/ik -
确认是否安装好了分词器
-
进入容器:
/usr/share/elasticsearch/bin -
运行:
elasticsearch-pluginA tool for managing installed elasticsearch plugins Non-option arguments: command Option Description ------ ----------- -h, --help show help -s, --silent show minimal output -v, --verbose show verbose output -
列出所有已安装的插件:
elasticsearch-plugin list[root@36a2ac9a6bd7 bin]# elasticsearch-plugin list # 安装成功 ik -
重启elasticsearch
docker restart elasticsearch
-
-
测试IK分词器
最大的分词组合
POST _analyze { "analyzer": "ik_smart", "text": "我爱我的祖国!" }返回结果:
{ "tokens" : [ { "token" : "我", "start_offset" : 0, "end_offset" : 1, "type" : "CN_CHAR", "position" : 0 }, { "token" : "爱我", "start_offset" : 1, "end_offset" : 3, "type" : "CN_WORD", "position" : 1 }, { "token" : "的", "start_offset" : 3, "end_offset" : 4, "type" : "CN_CHAR", "position" : 2 }, { "token" : "祖国", "start_offset" : 4, "end_offset" : 6, "type" : "CN_WORD", "position" : 3 } ] }
-
3.6安装kibana
-
编写docker-compose.yml配置
kibana: container_name: kibana image: kibana:7.4.2 environment: - ELASTICSEARCH_HOSTS=http://172.18.0.20:9200 - I18N_LOCALE=zh-CN ports: - "5601:5601" depends_on: - elasticsearch restart: on-failure networks: app_start: ipv4_address: 172.18.0.21 -
启动后浏览器访问
http://部署容器IP地址:5601/访问浏览器出现：Kibana server is not ready yet
可能就是Kibana服务器还没有准备好
查看docker Kibana 日志，出现一下字段为就绪（Kibana准备好了）
{ "type": "log", "@timestamp": "2022-07-18T09:03:16Z", "tags": [ "status", "plugin:spaces@7.4.2", "info" ], "pid": 7, "state": "green", // 状态由黄色变为绿色-准备好 "message": "Status changed from yellow to green - Ready", "prevState": "yellow", "prevMsg": "Waiting for Elasticsearch" }
3.7安装Logstash
-
启动临时容器
docker run -d --name=logstash logstash:7.4.2 -
将临时容器中的文件Copy出来
docker cp logstash:/usr/share/logstash/config /home/app_start/build/logstash/ docker cp logstash:/usr/share/logstash/data /home/app_start/build/logstash/ docker cp logstash:/usr/share/logstash/pipeline /home/app_start/build/logstash/ -
授权文件
这步必须做，否则后续后出现未知报错，logstash 启动不起来
#文件夹赋权 chmod -R 777 /home/app_start/build/logstash/ -
修改logstash/config 下的 logstash.yml 文件
http.host: 0.0.0.0 #path.config: /usr/share/logstash/config/conf.d/*.conf path.logs: /usr/share/logstash/logs pipeline.batch.size: 10 # 主要修改 es 的地址 xpack.monitoring.elasticsearch.hosts: - http://172.18.0.20:9200 -
修改 logstash/pipeline 下的 logstash.conf 文件
input { tcp { mode => "server" host => "0.0.0.0" # 允许任意主机发送日志 port => 5045 codec => json_lines # 数据格式 } } output { elasticsearch { hosts => ["http://172.18.0.20:9200"] # ElasticSearch 的地址和端口 index => "elk" # 指定索引名 codec => "json" } stdout { codec => rubydebug } } -
编写docker-compose.yml配置
logstash: image: logstash:7.4.2 container_name: logstash restart: always ports: - "5044:5044" #设置端口 默认端口 - "9600:9600" - "5045:5045" #自定义修改的 日志转换接口 volumes: - ./build/logstash/config:/usr/share/logstash/config - ./build/logstash/data:/usr/share/logstash/data - ./build/logstash/pipeline:/usr/share/logstash/pipeline networks: app_start: ipv4_address: 172.18.0.23 -
启动后查看日志
查看启动过程是否正常启动，及时发现问题
docker logs -f logstash -
常见错误
[2022-07-18T13:51:50,582][INFO ][org.logstash.beats.Server] Starting server on port: 5044 [2022-07-18T13:51:54,827][WARN ][logstash.runner ] SIGTERM received. Shutting down. [2022-07-18T13:51:55,897][INFO ][logstash.javapipeline ] Pipeline terminated {"pipeline.id"=>".monitoring-logstash"} [2022-07-18T13:51:56,823][ERROR][logstash.javapipeline ] A plugin had an unrecoverable error. Will restart this plugin. Pipeline_id:main Plugin: <LogStash::Inputs::Beats port=>5044, id=>"1db05a8093f0a1ba531f41f086b7b6aae3f181480601fd93614e3bf59e5a6608", enable_metric=>true, codec=><LogStash::Codecs::Plain id=>"plain_aadd2f75-f190-4183-a533-51389850e1b1", enable_metric=>true, charset=>"UTF-8">, host=>"0.0.0.0", ssl=>false, add_hostname=>false, ssl_verify_mode=>"none", ssl_peer_metadata=>false, include_codec_tag=>true, ssl_handshake_timeout=>10000, tls_min_version=>1, tls_max_version=>1.2, cipher_suites=>["TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384", "TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384", "TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256", "TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256", "TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384", "TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384", "TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256", "TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256"], client_inactivity_timeout=>60, executor_threads=>4> Error: Address already in use：
Address already in use（端口占用 5044），检查配置文件
[2022-07-18T13:51:55,924][INFO ][logstash.runner ] Starting Logstash {"logstash.version"=>"7.4.2", "jruby.version"=>"jruby 9.2.13.0 (2.5.7) 2020-08-03 9a89c94bcc OpenJDK 64-Bit Server VM 25.161-b14 on 1.8.0_161-b14 +indy +jit [linux-x86_64]"} [2022-07-18T13:51:55,262][WARN ][logstash.config.source.multilocal] Ignoring the 'pipelines.yml' file because modules or command line options are specified [2022-07-18T13:51:55,286][INFO ][logstash.agent ] No persistent UUID file found. Generating new UUID {:uuid=>"8fa4bf61-3190-4e9d-ac9a-eccf68220b9f", :path=>"/usr/share/logstash/data/uuid"} [2022-07-18T13:51:55,618][INFO ][logstash.config.source.local.configpathloader] No config files found in path {:path=>"/usr/share/logstash/config/conf.d/*.conf"} [2022-07-18T13:51:55,674][ERROR][logstash.config.sourceloader] No configuration found in the configured sources. [2022-07-18T13:51:55,820][INFO ][logstash.agent ] Successfully started Logstash API endpoint {:port=>9600} [2022-07-18T13:51:55,896][INFO ][logstash.runner ] Logstash shut down.：
No config files found in path {:path=>"/usr/share/logstash/config/conf.d/*.conf"},找不到配置文件，在logstash.yml 文件中注释掉就可以了
3.8安装ElasticSearch-head
-
启动临时容器
docker pull mobz/elasticsearch-head:5 docker run -d --name es_admin -p 9100:9100 mobz/elasticsearch-head:5 -
将临时容器中的文件Copy出来
docker cp es_admin:/usr/src/app/ /home/app_start/build/elasticsearch-head/ -
修改elasticsearch-head/app下的
Gruntfile.js文件connect: { server: { options: { # 添加 hostname: '0.0.0.0', hostname: '0.0.0.0', port: 9100, base: '.', keepalive: true } } } -
编写docker-compose.yml配置
elasticsearch-head: image: mobz/elasticsearch-head:5 container_name: elasticsearch-head restart: always ports: - "9100:9100" volumes: - ./build/elasticsearch-head/app/:/usr/src/app/ networks: app_start: ipv4_address: 172.18.0.24 -
启动后浏览器访问
http://部署容器IP地址:9100/ -
遇到跨域问题
去修改elasticsearch挂载目录下修改
elasticsearch.yml文件http.host: 0.0.0.0 # 添加如下两条 http.cors.enabled: true http.cors.allow-origin: "*"
3.9安装RabbitMQ
-
编写docker-compose.yml配置
rabbitmq: restart: always image: rabbitmq:management container_name: rabbitmq ports: - 5671:5671 - 5672:5672 - 4369:4369 - 25672:25672 - 15671:15671 - 15672:15672 networks: app_start: ipv4_address: 172.18.0.22端口介绍
4369, 25672 (Erlang发现&集群端口) 5672, 5671 (AMQP端口) 15672 (web管理后台端口) 61613, 61614 (STOMP协议端口) 1883, 8883 (MQTT协议端口) -
启动后浏览器访问
http://部署容器IP地址:15672/默认账号密码：
guest/guest
本机安装JDK
-
安装jdk1.8，推荐路径/usr/local/src，先创建目录
mkdir -p /usr/local/src/jdk -
查看是否已安装了jdk
rpm -qa | grep -i jdk -- 查看 rpm -e --nodeps 文件名 -- 卸载 -
下载jdk包
wget --no-check-certificate --no-cookies --header "Cookie: oraclelicense=accept-securebackup-cookie" http://download.oracle.com/otn-pub/java/jdk/8u131-b11/d54c1d3a095b4ff2b6607d096fa80163/jdk-8u131-linux-x64.tar.gz -
解压安装包
tar -zxvf jdk-8u131-linux-x64.tar.gz -
配置环境变量
vi /etc/profile在文件最后面加上
export JAVA_HOME=/usr/local/src/jdk/jdk1.8.0_131 export JRE_HOME=$JAVA_HOME/jre export CLASSPATH=$JAVA_HOME/lib:$JRE_HOME/lib:$CLASSPATH export PATH=$PATH:$JAVA_HOME/bin:$JRE_HOME/bin:$PATH -
让配置文件生效
标签：16z二极管丝印