DS26LS31CN

DS26LS31C / DS26LS31M四路高速差分线路驱动器 DS26LS31C/DS26LS31M Quad High Speed Differential Line Driver

The is a Quad High Speed Differential Line Driver, designed for digital data transmission over balanced lines. Meets all the requirements of EIA Standard RS-422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines. The circuit provides an enable and disable function common to all four drivers. It features TRI-STATE outputs and logically ANDed complementary outputs. The inputs are all LS compatible and are all one unit load.

.

2.0ns Typical output skew

.

10ns Typical input to output delay

.

Operation from single 5V supply

.

Outputs will not load line when VCC = 0V

.

Four line drivers in one package for maximum package density

.

Output short-circuit protection

.

Complementary outputs

.

Meets requirements of EIA standard RS-422

.

Pin compatible with AM26LS31

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.