PCA9549PW

与单独的I2C总线控制使八路总线开关 Octal bus switch with individually I2C-bus controlled enables

General description

The PCA9549 provides eight bits of high speed TTL-compatible bus switching controlled by the I2C-bus. The low ON-state resistance of the switch allows connections to be made with minimal propagation delay. Any individual A to B channel or combination of channels can be selected via the I2C-bus, determined by the contents of the programmable Control register. When the I2C-bus bit is HIGH logic 1, the switch is on and data can flow from Port A to Port B, or vice versa. When the I2C-bus bit is LOW logic 0, the switch is open, creating a high-impedance state between the two ports, which stops the data flow.

Features

■ 8-bit bus switch CBT

■ 5 Ω switch connection between two ports

■ I2C-bus interface logic; compatible with SMBus standards

■ Active LOW RESET input

■ 3 address pins allowing up to 8 devices on the I2C-bus

■ Bit selection via I2C-bus, in any combination

■ Power-up with all bits deselected

■ Low Ron switches

■ No glitch on power-up

■ Supports hot insertion

■ Low standby current

■ Operating power supply voltage range of 2.3 V to 5.5 V

■ 5 V tolerant inputs

■ 0 Hz to 400 kHz clock frequency

■ ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101

■ Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA

■ Packages offered: SO24, TSSOP24, HVQFN24