410-346-20

开发板, Arty Z7, APSoC Zynq-7000™所有可编程片上系统, 制造商和业余爱好者

The from is an Arty Z7 development platform for embedded vision. It is a ready to use development platform designed around the Zynq-7000™ All Programmable System-on-Chip AP SoC from Xilinx. The Zynq-7000 architecture tightly integrates a dual core, 650MHz ARM Cortex-A9 processor with Xilinx 7-series FPGA logic. This pairing grants the ability to surround a powerful processor with a unique set of software defined peripherals and controllers, tailored by users for the target application. The Vivado, Petalinux and SDSoC toolsets each provide an approachable path between defining custom peripheral set and bringing its functionality up to a Linux OS or bare metal program running on the processor.

.

512MB DDR3 with 16bit bus at 1050Mbps

.

16MB quad-SPI flash with factory programmed 48bit globally unique EUI-48/64™ compatible identifier

.

Programmable from JTAG, quad-SPI flash and microSD card

.

Powered from USB or any 7V to 15V external power source, microSD slot

.

Gigabit Ethernet PHY, USB-JTAG programming circuitry, USB-UART bridge

.

HDMI sink port input, HDMI source port output, PWM driven mono audio output with 3.5mm jack

.

4 push-buttons, 2 slide switches, 4 LEDs, 2 RGB LEDs

.

Two standard Pmod ports, 16 total FPGA I/O Arduino/chipKIT shield connector

.

Compatible with Xilinx"s high performance Vivado Design Suite

.

USB OTG PHY supports host only