PCA9561PW

Quad 6Bit multiplexed I2C EEPROM DIP switch

DESCRIPTION

The PCA9561 is a 20-pin CMOS device consisting of four 6-bit non-volatile EEPROM registers, 6 hardware pin inputs and a 6-bit multiplexed output. It is used for DIP switch-free or jumper-less system configuration and supports Mobile and Desktop VID Configuration, where 5 preset values 4 sets of internal non-volatile registers and 1 set of external hardware pins set processor voltage for operation in various performance or battery conservation sleep modes. The PCA9561 is also useful in server and telecom/networking applications when used to replace DIP switches or jumpers, since the settings can be easily changed via I2C/SMBus without having to power down the equipment to open the cabinet. The non-volatile memory retains the most current setting selected before the power is turned off.

FEATURES

• Selection of non-volatile register_n as source to MUX_OUT pins via I2C-bus

• I2C-bus can override MUX_SELECT pin in selecting output source

• 6-bit 5-to-1 multiplexer DIP switch

• 4 internal non-volatile registers

• Internal non-volatile registers programmable and readable via I2C-bus

• 6 open drain multiplexed outputs

• 400 kHz maximum clock frequency

• Operating supply voltage 3.0 V to 3.6 V

• 5 V and 2.5 V tolerant inputs/outputs

• Useful for Speed Step configuration of laptop

• 2 address pins, allowing up to 4 devices on the I2C-bus

• MUX_IN values readable via I2C-bus

• ESD protection exceeds 200 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101

• Latch-up testing is done to JESDEC Standard JESD78 which exceeds 100 mA.