26PCBFB2G

Pressure Sensor 0V to 0.05V 0psi to 5psi Gage 4Pin

复合 压力 ±5PSI（±34.47kPa） 公型 - 0.18"（4.57mm）管 0mV ~ 50mV（10V） 4-SIP 模块

得捷:
SENSOR 5PSIC 0.18" .05V

艾睿:
Use this 26PCBFB2G board mount pressure sensor from Honeywell to ensure that your circuit board is protected from dangerous gas or liquid pressure changes. It has a voltage of 0 to 0.05 V. This device has a typical operating supply voltage of 10 V. This part has a temperature range of -40 °C to 85 °C. It has a response time of 1Max ms. Its operating pressure range is 0psi to 5psi, while its maximum overload pressure is 20psi.

Chip1Stop:
Pressure Sensor 0V to 0.05V 0psi to 5psi Gage 4-Pin

TME:
Sensor: pressure; Range: ±5 psi; gage; Output conf: analogue

Verical:
Pressure Sensor 0V to 0.05V 0psi to 5psi Gage 4-Pin

MASTER:
Honeywell Miniature Low Pressure Sensors: 26PC Series, Compensated/Unamplified, 5 psi Pressure Range, Fluorosilicone Seal, Barbed Port, 2 x 2 DIP, Normal Polarity Output, Gage Pressure Measurement Type

Powell:
Sensors, Pressure Transducers, Piezoresistive Silicon

Online Components:
Pressure Sensor 0V to 0.05V 0psi to 5psi Gage 4-Pin

Win Source:
SENSOR PRESS GAUGE +5.0PSI / Pressure Sensor ±5PSI ±34.47kPa Compound Male - 0.18" 4.57mm Tube 0 mV ~ 50 mV 10V 4-SIP Module