LM2595TVADJG

1A,降压型DC/DC变换器

The LM2595 series of Buck Switching Regulators are monolithic integrated circuits that provide all the active functions for a step-down buck switching regulator, capable of driving a 1A load with excellent line and load regulation. Requiring a minimum number of external components, these Buck Switching Regulators are simple to use and include internal frequency compensation, and a fixed-frequency oscillator. The LM2595 series operates at a switching frequency of 150 kHz thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Available in a standard 5-lead TO-220 package with several different lead bend options, and a 5-lead D2PAK surface mount package. A standard series of inductors are available from several different manufacturers optimized for use with the LM2595 series. This feature greatly simplifies the design of switch-mode power supplies.Other features include a guaranteed +/-4% tolerance on output voltage under specified input voltage and output load conditions, and +/-15% on the oscillator frequency. External shutdown is included, featuring typically 80 µA standby current. Self protection features include a two stage frequency reducing current limit for the output switch and an over temperature shutdown for complete protection under fault conditions. See LM2596 for 3.0A and LM2594 for 0.5A.

Features |   | Benefits

---|---|---

 | |  | |  |

.

Adjustable output voltage range, 1.2V to 37V +/-4% max over line and load

|   |

.

Flexible to configure for different output voltages and applications

.

Available in TO-220 and D2PAK packages

|   |

.

Different mounting options

.

Guaranteed 1A output load current

|   |

.

High power designs

.

Input voltage range up to 40V

|   |

.

Can be used with several input voltage supplies +12V, +24V, +36V

.

Excellent line and load regulation specifications

|   |

.

Provides a stable power supply

.

150 kHz fixed frequency internal oscillator

|   |

.

No external component required to set frequency

.

TTL shutdown capability

|   |

.

Easy to implement low power modes

.

Low power standby mode, Iq typically 80 µA

|   |

.

Power saving mode

.

Uses readily available standard inductors

|   |

.

Quick and easy implementation

.

Thermal shutdown and current limit

|   |

.

Additional protection against faults