CD4016B

CMOS 四路双向开关

Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off.

The CD4016 "B" Series types are supplied in 14-lead hermetic dual-in-line ceramic packages F3A suffix, 14-lead dual-in-line plastic packages E suffix, 14-lead small-outline packages M, MT, M96, and NSR suffixes, and 14-lead thin shrink small-outline packages PW and PWR suffixes.

.

20-V digital or ± 10-V peak-to-peak switching

.

280- typical on-state resistance for 15-V operation

.

Switch on-state resistance matched to within 10 typ. over 15-V signal-input range

.

High on/off output-voltage ratio:

   65 dB typ. @ fis = 10 kHz, RL = 10 k

.

High degree of linearity:

   <0.5% distortion typ. @ fis = 1 kHz, Vis = 5 Vp-p, VDD–VSS

.

Extremely low off-state switch leakage resulting in very low offset current and high effective off-state resistance:

   100pA typ. @ VDD–VSS = 18 V, TA = 25°C

.

Extremely high control input impedance control circuit isolated form signal circuit:

   1012typ.

.

Low crosstalk between switches:

   –50 dB typ. @ fis= 0.9 MHz, RL = 1 k

.

Matched control-input to signal-output capacitance:

   Reduces output signal transients

.

Frequency response, switch on = 40MHz typ.

.

100% tested for quiescent current at 20 V

.

Maximum control input current of 1 µA at 18 V over full package temperature range; 100 nA at 18 V and 25°C

.

5-V, 10-V, and 15-V parametric ratings

.

Applications:

.

Analog signal switching/multiplexing

.

Signal gating

.

Squelch control

.

Chopper

.

Modulator

.

Demodulator

.

Commutating switch

.

Digital signal switching/multiplexing

.

CMOS logic implementation

.

Analog-to-digital & digital-to-analog conversion

.

Digital control of frequency, impedance, phase, and analog-signal gain

Data sheet acquired from Harris Semiconductor