I200S

Fluke i200 和 i200s 交流探头和电流钳i200 是单范围 200 A 交流电流钳，通过香蕉插头输出电流。 i200 与所有可接受香蕉插头的 Fluke 万用表或其他电流测量设备兼容。 i200s 是双范围 20 A 和 200 A 交流电流钳，通过 BNC 连接器输出电压。 随附双香蕉到 BNC 适配器，允许 i200s 连接到万用表，带香蕉输入。 Fluke 电流钳是扩展 Fluke 工具电流范围的理想工具。### **共享功能**最大电流：240 A 交流 可用频率：40 Hz → 10 KHz 夹可打开至 21 mm 最大导线直径：20 mm 或 20 x 5 mm 母线 ### **i200**测量范围：0.5 → 240 A 输出信号：1 mA/A 安全屏蔽香蕉插头可用于大多数万用表 ### **i200s**测量范围：0.1 → 24 A 和 0.5 → 240 A 输出信号：20 A 范围内 100 mV/A，200 A 范围内 10 mV/A 随附一个 BNC 连接器，用于带 BNC 输入的示波器、ScopeMeters®（示波表）和测试设备 香蕉 / BNC 适配器，适合用于万用表 ### 标准EN61010，III 类 600 V### 电流探头

200 A, 600 V, AC Current Clamp

Current clamps are the ideal tools to extend the current ranges of Fluke tools. The i200s is a dual range 20A and 200A ac current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.

**

* Companion to your scopemeter, power quality meter or digital multimeter to measure up to 200 A AC

* Included adapter for DMM"s

* Two ranges: 20 A & 200A, 10 or 100 mV/ Amp output

* Take accurate current readings without breaking the circuit

* Max. conductor Ø 20 mm

* CAT III 600V safety rating

The i200 is a single range 200A clamp-on AC Current Clamp with current output via safety shrouded banana plugs. The i200s is a dual range 20A and 200A clamp-on AC current clamp with voltage output via a safety insulated BNC connector. A dual banana to BNC

**