DAC 2CH R-2R 12Bit 24Pin SOIC W T/R
Product Details
The AD8582 is a complete, parallel input, dual 12-bit, voltage output DAC designed to operate from a single +5 volt supply. Built using a CBCMOS process, this monolithic DAC offers the user low cost, and ease-of-use in +5 volt only systems.
Included on the chip, in addition to the DACs, are a rail-to-rail amplifier, latch and reference. The reference VREF is trimmed to 2.5 volts output, and the on-chip amplifier gains up the DAC output to 4.095 volts full scale. The user needs only supply a +5 volt supply.>/p>
The AD8582 is coded natural binary. The op amp output swings from 0 volt to +4.095 volts for a one-millivolt-per-bit resolution, and is capable of driving ±5 mA. Operation down to 4.3 V is possible with output load currents less than 1 mA.
The high speed parallel data interface connects to the fastest processors without wait states. The double-buffered input structure allows the user to load the input registers one at a time, then a single load strobe tied to both LDA + LDB inputs will update both DAC outputs simultaneously. LDA and LDB can also be activated independently to immediately update their respective DAC registers. An address input decodes DAC A or DAC B when the chip select CS input is strobed. An asynchronous reset input sets the output to zero scale. The MSB bit can be used to establish a preset to midscale when the reset input is strobed.
The AD8582 is available in the 24-pin plastic DIP and the surface mount SOIC-24. Each part is fully specified for operation over -40°C to +85°C, and the full +5 V ±5% power supply range.
### Features and Benefits
型号 | 品牌 | 下载 |
---|---|---|
AD8582AR-REEL | ADI 亚德诺 | 下载 |
AD8552AR | ADI 亚德诺 | 下载 |
AD8532ARZ | ADI 亚德诺 | 下载 |
AD8541ARTZ-REEL7 | ADI 亚德诺 | 下载 |
AD8512ARZ | ADI 亚德诺 | 下载 |
AD8572ARZ-REEL | ADI 亚德诺 | 下载 |
AD8512ARMZ-REEL | ADI 亚德诺 | 下载 |
AD8513ARZ-REEL | ADI 亚德诺 | 下载 |
AD8542ARMZ | ADI 亚德诺 | 下载 |
AD8510ARMZ | ADI 亚德诺 | 下载 |
AD8509ARUZ-REEL | ADI 亚德诺 | 下载 |