SM320VC5510A-EP

增强型产品定点数字信号处理器

The 320VC5510 5510 fixed-point digital signal processor DSP is based on the TMS320C55x DSP generation CPU processor core. The C55x™ DSP architecture achieves high performance and low power through increased parallelism and total focus on reduction in power dissipation. The CPU supports an internal bus structure composed of one program bus, three data-read buses, two-data write buses, and additional buses dedicated to peripheral and DMA activity. These buses provide the ability to perform up to three data reads and two data writes in a single cycle. In parallel, the DMA controller can perform up to two data transfers per cycle independent of the CPU activity.

The C55x CPU provides two multiply-accumulate MAC units, each capable of 17-bit x 17-bit multiplication in a single cycle. A central 40-bit arithmetic/logic unit ALU is supported by an additional 16-bit ALU. Use of the ALUs is under instruction set control, providing the ability to optimize parallel activity and power consumption. These resources are managed in the address unit AU and data unit DU of the C55x CPU.

The C55x™ DSP generation supports a variable byte width instruction set for improved code density. The instruction unit IU performs 32-bit program fetches from internal or external memory and queues instructions for the program unit PU. The program unit decodes the instructions, directs tasks to AU and DU resources, and manages the fully protected pipeline. Predictive branching capability avoids pipeline flushes on execution of conditional instructions. The 5510 also includes a 24K-byte instruction cache to minimize external memory accesses, improving data throughput and conserving system power.

The 5510 peripheral set includes an external memory interface EMIF that provides glueless access to asynchronous memories like EPROM and SRAM, as well as to high-speed, high-density memories such as synchronous DRAM and synchronous burst SRAM. Three full-duplex multichannel buffered serial ports McBSPs provide glueless interface to a variety of industry-standard serial devices, and multichannel communication with up to 128 separately enabled channels. The enhanced host-port interface EHPI is a 16-bit parallel interface used to provide host processor access to internal memory on the 5510. The EHPI can be configured in either multiplexed or non-multiplexed mode to provide glueless interface to a wider variety of host processors. The DMA controller provides data movement for six independent channel contexts without CPU intervention, providing DMA throughput of up to two 16-bit words per cycle. Two general-purpose timers, eight general-purpose I/O GPIO pins, and digital phase-locked loop DPLL clock generation are also included.

The 5510 is supported by the industry’s leading eXpressDSP™ software environment including the Code Composer Studio™ integrated development environment, DSP/BIOS™ software kernel foundation, the TMS320™ DSP Algorithm Standard, and the industry’s largest third-party network. Code Composer Studio features code generation tools including a C-Compiler, Visual Linker, simulator, Real-Time Data Exchange RTDX™, XDS510™ emulation device drivers, and Chip Support Libraries CSL. DSP/BIOS is a scalable real-time software foundation available for no cost to users of Texas Instruments’ DSP products providing a preemptive task scheduler and real-time analysis capabilities with very low memory and megahertz overhead. The TMS320 DSP Algorithm Standard is a specification of coding conventions allowing fast integration of algorithms from different teams, sites, or third parties into the application framework. Texas Instruments’ extensive DSP third-party network of over 400 providers brings focused competencies and complete solutions to customers.

Texas Instruments has also developed foundation software available for the 5510. The C55x DSP Library DSPLIB features over 50 C-callable software kernels FIR/IIR filters, Fast Fourier Transforms FFTs, and various computational functions. The DSP Image/Video Processing Library IMGLIB contains over 20 software kernels highly optimized for C55x DSPs and is compiled with the latest revision of the C55x DSP code generation tools. These imaging functions support a wide range of applications that include compression, video processing, machine vision, and medical imaging.

The TMS320C55x DSP core was created with an open architecture that allows the addition of application-specific hardware to boost performance on specific algorithms. The hardware extensions on the 5510 strike the perfect balance of fixed function performance with programmable flexibility, while achieving low-power consumption, and cost that traditionally has been difficult to find in the video-processor market. The extensions allow the 5510 to deliver exceptional video codec performance with more than half its bandwidth available for performing additional functions such as color space conversion, user-interface operations, security, TCP/IP, voice recognition, and text-to-speech conversion. As a result, a single 5510 DSP can power most portable digital video applications with processing headroom to spare. For more information, see the _TMS320C55x Hardware Extensions for Image/Video Applications Programmer’s Reference_ literature number SPRU098. For more information on using the the DSP Image Processing Library, see the _TMS320C55x Image/Video Processing Library Programmer’s Reference_ literature number SPRU037.

.

Controlled Baseline

.

One Assembly/Test Site, One Fabrication Site

.

Extended Temperature Performance of –40°C to 85°C

.

Enhanced Diminishing Manufacturing Sources DMS Support

.

Enhanced Product-Change Notification

.

Qualification Pedigree

.

High-Performance, Low-Power, Fixed-Point 320C55x™ Digital Signal Processor DSP

.

5-ns Instruction Cycle Time

.

200-MHz Clock Rate

.

One/Two Instructions Executed per Cycle

.

Dual Multipliers Up to 400 Million Multiply-Accumulates Per Second MMACS

.

Two Arithmetic/Logic Units

.

One Internal Program Bus

.

Three Internal Data/Operand Read Buses

.

Two Internal Data/Operand Write Buses

.

Instruction Cache 24K Bytes

.

160K x 16-Bit On-Chip RAM Composed of:

.

Eight Blocks of 4K × 16-Bit Dual-Access RAM DARAM 64K Bytes

.

32 Blocks of 4K × 16-Bit Single-Access RAM SARAM 256K Bytes

.

16K × 16-Bit On-Chip ROM 32K Bytes

.

8M × 16-Bit Maximum Addressable External Memory Space

.

32-Bit External Memory Interface EMIF With Glueless Interface to:

.

Asynchronous Static RAM SRAM

.

Asynchronous EPROM

.

Synchronous DRAM SDRAM

.

Synchronous Burst SRAM SBSRAM

.

Programmable Low-Power Control of Six Device Functional Domains

.

On-Chip Peripherals

.

Two 20-Bit Timers

.

Six-Channel Direct Memory Access DMA Controller

.

Three Multichannel Buffered Serial Ports McBSPs

.

16-Bit Parallel Enhanced Host-Port Interface EHPI

.

Programmable Digital Phase-Locked Loop DPLL Clock Generator

.

Eight General-Purpose I/O GPIO Pins and Dedicated General-Purpose Output XF

.

On-Chip Scan-Based Emulation Logic

.

IEEE Std 1149.1 JTAG Boundary Scan Logic

.

240-Terminal MicroStar BGA™ Ball Grid Array GGW Suffix

.

3.3-V I/O Supply Voltage

.

1.6-V Core Supply Voltage§

TMS320C55x and MicroStar BGA are trademarks of Texas Instruments.

Other trademarks are the property of their respective owners.

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test HAST or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

IEEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture.

§ Some TMX320VC5510 prototype devices may require core supply voltage other than 1.6 V. See the Electrical Specification section of this data manual for more information. See the _TMS320VC5510 Digital Signal Processor Silicon Errata_ literature number SPRZ008 for further clarification and distinguishing markings.

C55x, eXpressDSP, Code Composer Studio, DSP/BIOS, TMS320, RTDX, and XDS510 are trademarks of Texas Instruments.

TMS320C54x and C54x are trademarks of Texas Instruments.

TMS320C5000 is a trademark of Texas Instruments.