AD8638ARJZ

ANALOG DEVICES  AD8638ARJZ  运算放大器, 单路, 1.5 MHz, 1个放大器, 2 V/µs, ± 2.2V 至 ± 8V, SOT-23, 5 引脚

The is an auto-zero single Operational Amplifier with rail-to-rail output swing. This amplifier has very low offset, drift and bias current. Operation is fully specified from 5 to 16V single supply. The AD8638 provides benefits previously found only in expensive zero-drift or chopper-stabilized amplifier. No external capacitors are required. In addition, the AD8638 greatly reduce the digital switching noise found in most chopper-stabilized amplifiers. With a typical offset voltage of only 3µV, drift of 0.01µV/°C and noise of 1.2µVp-p 0.1 to 10Hz, the AD8638 is suited for applications in which error sources cannot be tolerated. Position and pressure sensors and strain gage amplifiers benefit greatly from nearly zero drift over their operating temperature ranges. Many systems can take advantage of the rail-to-rail output swing provided by the AD8638 to maximize signal-to-noise ratio SNR.

.

High accuracy and low noise

.

9µV Maximum low offset voltage

.

0.04µV/°C Maximum offset drift

.

136dB Typical high gain

.

133dB Typical high CMRR

.

143dB Typical high PSRR

.

40pA Maximum very low input bias current

.

1.3mA Maximum low supply current