ST72681/R21

USB 2.0高速闪存驱动器控制器 USB 2.0 high-speed Flash drive controller

Introduction

The ST72681 is a USB 2.0 high-speed Flash drive controller. The USB 2.0 high-speed interface including PHY and function supports USB 2.0 mass storage device class.

The mass storage controller interface MSCI combined with the Reed-Solomon encoder/decoder on-the-fly correction 4-byte on 512-byte data blocks provides a flexible, high transfer rate solution for interfacing a wide of range NAND Flash memory device types.

Features

■ USB 2.0 interface compatible with mass storage device class

   – Integrated USB 2.0 PHYSupports USB high speed and full speed

   – Suspend and Resume operations

■ Mass storage controller interface MSCI

   – Supports all types of NAND Flash devices including ST, Hynix, Samsung, Toshiba, Micron, Renesas

   – Reed-Solomon encoder/decoder on-the-fly correction 4 bytes of a 512-byte block

   – Flash identification support

   – Up to 12 MB/s for read and 8 MB/s for write operations in single channel

   – Up to 4 NAND devices supported in a single channel

■ Embedded ST7 8-bit MCU

■ Supply management

   – 3.3 V operation

   – Integrated 3.3-1.8 V voltage regulator

■ USB 2.0 low-power device compliant

   – Less than 100 mA during write operation with two NAND Flash devices

   – Less than 500 µA in suspend mode

■ AutoRun CDROM partition support

■ Bootability support HDD mode

■ Clock management

   – Integrated PLL for generating core and USB 2.0 clock sources using an external 12 MHz crystal oscillator

■ Data protection

   – Write protect switch control

   – Public/private partitions support

■ Production tool device configurability:

   – USB vendor ID/product ID VID/PID, serial number and USB strings with foreign language support

   – SCSI strings

   – One or two LED outputs

   – Adjustable NAND Flash bus frequency to reach highest performance

■ Code update in the NAND Flash memory

■ TQFP48 7x7 ECOPACK® package

■ Development support

   – Complete reference design including schematics, BOM and gerber files

■ Supports Windows Vista, XP, 2000, ME, Linux and MacOS. Drivers available for Windows 98 SE