8.16.11

SEGGER  8.16.11  仿真器, J-LINK ULTRA/J-FLASH, 套件

The is a bundle of hardware item J-Link Ultra and software item J-Flash. The J-LINK ULTRA is a JTAG/SWD emulator designed for ARM/Cortex and other supported CPUs. It is fully compatible to the standard J-Link and works with the same PC software. Based on the highly optimized and proven J-Link, it offers even higher speed as well as target power measurement capabilities due to the faster CPU, built in FPGA and high speed USB interface. It connects via USB to a PC running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista or 7. The J-Link Ultra has a built in 20 pin JTAG/SWD connector. The J-Flash is a stand alone flash programming software for PCs running Microsoft Windows. The supported Microsoft Windows versions are Microsoft Windows 2000, XP, XP x64, 2003, 2003 x64, Vista, Vista x64, 7, 7 x64, Windows 8, Windows 8 x64, Linux and Mac OSX 10.5 and higher. J-Flash has an intuitive user interface and makes programming flash devices convenient.

.

J-Link Ultra is fully compatible to the standard J-Link

.

Very high performance for all supported CPU cores

.

Hi speed USB 2.0 interface

.

JTAG speed up to 25MHz

.

Serial wire debug SWD supported

.

J-Flash supports ARM7/ARM9, Cortex-M0/M1/M3/M4 and Renesas RX600 core

.

Microcontroller internal flash support

.

Support for most external flash chips

.

High speed programming up to 200KBytes/sec

.

Very high speed blank check: approximately 16MBytes/sec depending on the chip