IPSAT-G4002-5

压力传感器, 40 bar, 模拟, 量规, 28 VDC, G1/4 1/4英寸BSP

The from Cynergy3 is an IPSAT series intrinsically safe pressure transducer. The IPSAT series is ideally suited for use in a wide range of industrial applications in hazardous areas. The probe uses a piezoresistive ceramic sensor, giving excellent media compatibility within stainless steel housing. The electronics incorporate a microprocessor based amplifier, requiring no adjusting and giving stable electronics, especially industrial applications. Each device is temperature compensated, calibrated and supplied with a traceable serial number and calibration certificate.

.

Input pressure range from 0bar to 40bar gauge

.

Supply voltage is 10VDC to 28VDC, output current of 4mA to 20mA

.

ATEX / IECEx II Ex ia IIC T4 Ga Ta approval, CE compliant

.

Two wire system

.

Accuracy < ±0.25% / FS BFSL, setting errors offsets zero & full scale< ±0.5% / FS

.

316 stainless steel housing material and viton "O" ring seals material

.

Operational life is greater than 100 x 10^6 cycles

.

Insulation resistance is greater than 50Mohm at 50VDC

.

Operating temperature range from -20°C to +120°C

.

IP65 rated DIN43650 connector, 1/4" BSPP male connection