DRV3201QPAPQ1

3相电机驱动IC，用于汽车安全应用 3 Phase Motor Driver-IC for Automotive Safety Applications

* Qualified for Automotive Applications * AEC-Q100 Test Guidance With the Following Results: * Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature * Device HBM ESD Classification Level H2 * Device CDM ESD Classification Level C2 * 3 Phase Bridge Driver for Motor Control * Drives 6 Separate N-Channel Power MOSFETs up to 250 nC Gate Charge * Programmable 140 mA–1 A Gate Current Drive Source/Sink for Easy Output Slope Adjustment * –7 V to 40 V Compliance on All FET Driver Pins to Handle Inductive Under/Overshooting * Separate Control Input for Each Power MOSFET * PWM Frequency up to 30 kHz * Supports 100% Duty Cycle Operation * Operating Voltage: 4.75 to 30 V * Proper Low Supply Voltage Operation Due to Integrated Boost Converter for Gate-Driver Voltage Generation * Logic Functional Down to 3 V * Short Circuit Protection With VDS-Monitoring and Adjustable Detection Level * Two Integrated High Accuracy Current Sense Amplifiers With Two Gain-Programmable Second Stage for Higher Resolution at Low Load Current Operation * Over and Undervoltage Protection * Shoot Through Protection With Programmable Dead Time * Three Real Time Phase Comparators * Over Temperature Warning and Shut Down * Sophisticated Failure Detection and Handling Through SPI Interface * Sleep Mode Function * Reset and Enable Function * Package: 64-pin HTQFP PowerPAD