MP1011EMA

Cold Cathode Fluorescent Lamp Driver

General Description

The MP1011A is a Power IC offering a complete solution for driving one or more Cold Cathode Fluorescent Lamps CCFL. This Power IC converts unregulated DC voltage to a nearly pure sine wave required to ignite and operate the CCFL. Based on proprietary power topology and patented control techniques, it greatly increases the power conversion efficiency. The MP1011A supports both analog and burst mode dimming without any additional external components. The MP1011A offers four distinct performance advantages:

1\. More light for less power

2\. Small board implementation

3\. Low EMI emission

4\. Low cost off the shelf components

 

Features

· Integrated power switches

· 6.0 to 22v variable supply voltage with regulated lamp current.

· Rated 12W power output at 12V input

· Open lamp regulation

· Current and Voltage feedback control

· Logic Level burst mode control

· Thermal Shutdown

· Supports Open/Short Lamp protection

· Soft Start

· Output is short circuit protected

· Low lamp operating voltage for increasing transformer or using smaller transformer

· Allows Burst-Mode Operation

· No ballast capacitor required

Applications

  LCD backlight inverter for large portable or desktop display.