TPS7A1601EVM-046

TPS7A1601 Linear Regulator 5VDC Output Evaluation Board

The is a fully assembled and tested evaluation module and reference design for evaluating the TPS7A1601 linear regulator. It can also evaluates TPS7A16xx family of linear regulators. This particular evaluation module configuration contains a single linear regulator with internal thermal and current limit shutdowns. The TPS7A1601 also has enable disable, PG power good, and user programmable PG circuitry in an extremely small DGN MSOP-8 Power PAD package. The regulator, including external components, is capable of delivering up to 100mA to the load depending on the input/output power dissipation across the part. The TPS7A16xx does not require an input capacitor, and the output capacitor only needs to be >= 2.2µF effective minimum for stability; however, for conservative design practice accounting for widely varying noise environments and dynamic line/load conditions, a 1µF input capacitor and a 0.01µF feed forward capacitor have been used in the design.

.

Input Voltage ranges from 6.0V to 60.0V

.

Input transient protection to 66V

.

5.0V adjustable by customer modification to 20V Vout fixed output

.

Accuracy is of 2%

.

Drop out voltage is 200mV at 20mA

.

Stable with ceramic output capacitance is greater than or equal to 2.2uF

.

CMOS logic level compatible enable and power good pin

.

User Programmable delay function

.

Fixed current limit

.

Thermal shutdown protection