M41T93SQA6F

串行SPI总线RTC，电池切换 Serial SPI bus RTC with battery switchover

Description

The M41T93 is a low power Serial SPI Bus Real Time Clock with a built-in 32.768kHz oscillator external crystal-controlled for the QFN16 package, and embedded crystal for the SOX18 package. Eight bytes of the Register Map see Table 3 on page 18 are used for the clock/calendar function and are configured in binary coded decimal BCD format. An additional 17 bytes of the Register Map provide status/control of the two Alarms, Watchdog, 8-Bit Counter, and Square Wave functions. An additional seven bytes are made available as user SRAM.

Features

■ Ultra-low battery supply current of 365nA

■ Factory calibrated accuracy ±5PPM guaranteed after 2 reflows SOX18

  – Much better accuracies achievable using built-in programmable analog and digital calibration circuits

■ 2.0V to 5.5V clock operating voltage

■ Counters for tenths/hundredths of seconds, seconds, minutes, hours, day, date, month, year, and century

■ Automatic switch-over and reset output circuitry fixed reference

  –M41T93S: VCC= 3.0V to 5.5V 2.85V≤VRST ≤ 3.00V

  –M41T93R: VCC= 2.7V to 5.5V 2.55V≤VRST ≤ 2.70V

  –M41T93Z: VCC= 2.38V to 5.50V 2.25V≤VRST≤2.38V

■ Compatible with SPI busserial interface positive clock SPI modes

■ Programmable alarm with interrupt function valid even during battery back-up mode

■ Optional 2nd programmable alarm available

■ Square wave output defaults to 32kHz on power-up

■ RESET RST output

■ Watchdog timer

■ Programmable 8-bit counter/timer

■ 7 bytes of battery-backed user SRAM

■ Battery low flag

■ Power-down timestamp HT bit

■ Low operating current of 80µA

■ Oscillator stop detection

■ Battery or Super-cap™ back-up

■ Operating temperature of –40°C to +85°C

■ Package options include:

  – a 16-lead QFN or an 18-lead embedded crystal SOIC

■ RoHS compliance: lead-free components are compliant with the RoHS directive