SN54HC253

具有三态输出的双路 4 线路至 1 线路数据选择器/多路复用器

Each of these data selectors/multiplexers contains inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate output-control inputs are provided for each of the two 4-line sections.

The 3-state outputs can interface with and drive data lines of bus-organized systems. With all but one of the common outputs disabled in the high-impedance state, the low impedance of the single enabled output drives the bus line to a high or low logic level. Each output has its own output-enable OE\ input. The outputs are disabled when their respective OE\ is high.

.

3-State Version of ’HC153

.

Wide Operating Voltage Range of 2 V to 6 V

.

High-Current Inverting Outputs Drive Up To 15 LSTTL Loads

.

Low Power Consumption, 80-µA Max ICC

.

Typical tpd = 9 ns

.

±6-mA Output Drive at 5 V

.

Low Input Current of 1 µA Max

.

Permit Multiplexing From n Lines to One Line

.

Perform Parallel-to-Serial Conversion