TLC2543-EP

TLC2543-EP概述

军用增强型塑料 12 位 66kSPS ADC,具有串行 输出、可编程 MSB/LSB 优先、11 通道

* Controlled Baseline

.
One Assembly/Test Site, One Fabrication Site
.
Extended Temperature Performance of -40°C to 125°C TLC2543Q and -55°C to 125°C TLC2543M
.
Enhanced Diminishing Manufacturing Sources DMS Support
.
Enhanced Product Change Notification
.
Qualification Pedigree1
.
12-Bit-Resolution Analog-to-Digital Converter ADC
.
10-µs Conversion Time Over Operating Temperature
.
11 Analog Input Channels
.
Three Built-In Self-Test Modes
.
Inherent Sample-and-Hold Function
.
Linearity Error . . . ±1 LSB Max
.
On-Chip System Clock
.
End-of-Conversion EOC Output
.
Unipolar or Bipolar Output Operation Signed Binary With Respect to 1/2 the Applied Voltage Reference
.
Programmable Most Significant Bit MSB or Least Significant Bit LSB First
.
Programmable Power Down
.
Programmable Output Data Length
.
CMOS Technology
.
Application Report Available2

1 Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test HAST or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.

2 _Microcontroller Based Data Acquisition Using the TLC2543 12-bit Serial-Out ADC_ SLAA012

## DESCRIPON/ORDERING INFORMATION

The TLC2543 is a 12-bit, switched-capacitor, successive-approximation, analog-to-digital converter ADC. This device, with three control inputs [chip select CS, input-output clock I/O CLOCK, and address input DATA INPUT], is designed for communication with the serial port of a host processor or peripheral through a serial 3-state output. The device allows high-speed data transfers from the host.

In addition to the high-speed converter and versatile control capability, the device has an on-chip 14-channel multiplexer that can select any 1 of 11 inputs or any 1 of 3 internal self-test voltages. The sample-and-hold function is automatic. At the end of conversion, the end-of-conversion EOC output goes high to indicate that conversion is complete. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range.

TLC2543-EP数据文档
型号 品牌 下载
TLC2543-EP

TI 德州仪器

下载
TLC27L4C

TI 德州仪器

下载
TLC2543CDW

TI 德州仪器

下载
TLC2543IN

TI 德州仪器

下载
TLC2543CFNG3

TI 德州仪器

下载
TLC272ACPE4

TI 德州仪器

下载
TLC272CDR

TI 德州仪器

下载
TLC2272AIDR

TI 德州仪器

下载
TLC272CPSR

TI 德州仪器

下载
TLC2272CPWR

TI 德州仪器

下载
TLC272BCPE4

TI 德州仪器

下载

锐单商城 - 一站式电子元器件采购平台