CC1200DK

开发套件, CC1200高性能射频收发器, Sub GHz, 2x 脉冲天线

The development kit provides a complete platform for hardware performance testing and software development for sub 1GHz CC1200 device. The CC1200 is a fully integrated single chip radio transceiver designed for high performance at very low power and low voltage operation in cost effective wireless systems. All filters are integrated, removing the need for costly external SAW and IF filters. The development kit comes pre programmed with a packet error rate test for easy out of the box evaluation of the RF performance of the device. RF range and robustness can be tested with different RF settings, and power consumption can be measured easily. This kit supports the frequency range from 868MHz to 930MHz.

.

Dedicated packet handling for 802.15.4g

.

Improved OOK shaping for less occupied bandwidth

.

Digital RSSI measurement

.

Built in coding gain support for increased range and robustness

.

Advanced digital signal processing for improved sync detect performance

.

High performance single chip transceiver

.

Programmable output power up to 16dBm with 0.4dB step size

.

Automatic output power ramping

.

2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOK supported modulation formats

.

Hardware AES128 accelerator

The kit contains ESD sensitive components. Handle with care to prevent permanent damage. To minimize risk of injury, avoid touching components during operation if symbolized as hot.

Additional plug in boards EMK can be purchased separately to support other frequencies.