SC14WAMDECT SF01T

2.1 V 至 3.45 V 预编程 无绳 音频 模块

The from Semiconductor is a wireless audio module in MOD88 package. It is a cordless audio module with an integrated baseband, radio transceiver, power amplifier and crystal to be used in cordless microphone applications in the DECT frequency band. This module is intended for users with little or no DECT experience who wish to make a wireless audio system. It can be configured for various audio applications. A public address system has two portable parts PP with two microphones and one fixed part FP configured as a receiver and integrated into loudspeaker. Another application is a tour guide system where one a microphone FP broadcasts to up to 128 receivers PP with an integrated loudspeaker or headset connected. The SC14WAMDECT SF is suitable for both FP and PP usage, a hardware pin selects the function of the module. It is pre-approved for use in all countries that use DECT frequency band as well as the DECT 6.0 frequency band used in North America.

.

Pre-programmed and ready to use module

.

Antenna embedded, support for external antennas

.

High quality audio sampled at 25.6KHz

.

14.2ms PA mode, 18.3ms TG mode latency

.

UART data transfer up to 1Kbit/s in TG mode and access code for secure registration in TG mode

.

ETSI DECT and FCC DECT 6.0 certified, Japan DECT J-DECT pre-certified

.

Supports 1.9GHz and 1.7GHz DECT bands and receiver sensitivity is less than -93dBm

.

Transmit power is EU: 23dBm, USA: 20dBm, JPN: 20dBm

.

Power supply voltage range from 2.1V to 3.45V, supports NiMH and alkaline batteries

.

Small form factor 19.6mm x 18mm x 2.7mm, operating temperature range from -40°C to 85°C