GPS-3030DD

台式电源, 可调输出, 1输出, 0 V, 30 V, 0 A, 3 A

The from is a GPS series single output 90W linear DC power supply with 3 digits 0.39" digital LED display. It features overload and reverse polarity protection as well as high regulation and low ripple/noise that are maintained at 0.01% and < 1mVrms, respectively. Continuous or dynamic internal load selection accommodates applications such as pulsed current. Remote control terminals offer programming and operation from an external device. The power supply operates in constant voltage CV and constant current CC modes. It has line regulation <= 0.01% + 3mV CV, <= 0.2% + 3mA CC, load regulation of <= 0.01% + 3mV current <= 3A, <= 0.01% + 5mV current > 3A CV and <= 0.2% + 3mA CC. The ripple & noise is <= 0.5mVrms 5Hz ~ 1MHz rating current <= 3A, <= 1mVrms 5Hz ~ 1MHz rating current > 3A CV and <= 3mArms ripple current CC. It has insulation resistance of 20Mohm or above DC 500V, chassis and terminal, 30Mohm or above DC 500V, chassi

.

0V to 30V output voltage, 0A to 3A output current

.

Light and compact design

.

0.01% high regulation, series or parallel operation

.

100V/120V/220V/240V±10%, 50/60Hz AC power source

.

Remote control for external programmability

.

Internal select for continuous or dynamic load, low ripple and noise

.

Recovery time of <= 100µS 50% load change, minimum load 0.5A in CV mode

.

Temperature coefficient of <= 300ppm/°C in CV mode

.

128mm W x 145mm H x 285mm D dimension, 5Kg weight

.

Optional European type jack terminal