ATV212H075M3X

Variable Speed Drive, Altivar 212 Series, Asynchronous, Three Phase, 750W, 200 to 240VAC

The is a variable speed AC Drive with heat sink. This drive is for 3-phase 0.75kW asynchronous motors. It is specifically intended for the most commonly encountered fluid management applications. Due to its eco-energy based design, energy savings of up to 70% can be achieved compared to a traditional control system. This commercialized drive comes with an adjustable PI regulator. The electrical isolation is between power and control.

.

RTU Transmission frame

.

IEC 61800-5-1 Pollution degree

.

12kHz Switching frequency

.

±15% Torque accuracy

.

1 LED - red - DC bus energized local signalling

.

By DC injection Braking to standstill

.

4230VDC Between control and power terminals dielectric strength

.

2830VDC Between earth and power terminals dielectric strength

.

>=1MR at 500VDC for 1 minute Insulation resistance

.

2-wire RS485 Physical interface

.

51dB conforming to 86/188/EEC Noise level