L99MD02XP

H-Bridge Driver 6V to 38V 36Pin PowerSSO Tube

The L99MD02 IC is a 6 x half bridge driver for automotive applications. The device is intended to drive DC-motors. It is possible to drive 3 DC-motors simultaneously or up to 5 DC-motors sequentially.

The integrated 24 bit standard serial peripheral interface SPI controls all outputs and provides diagnostic information: normal operation, open-load in on-state, overcurrent, temperature warning and overtemperature.

**Key Features**

.

6 half bridges

.

RON = typ.0.9 Ω HS, 0.64 Ω LS at Tj = 25 °C

.

Current limit of each output at minimum 0.8 A

.

Internal PWM generation

.

PWM mode option for all half bridges for hold current

.

Two current monitor outputs

.

SPI interface for data communication

.

Temperature warning

.

All outputs overtemperature protected

.

All outputs short circuit protected

.

VCC supply voltage 3.0 to 5.3 V

.

Very low current consumption in standby mode typ. 5 μA

.

VS operating range compliant: 6 – 18 V