CK-U1-KCU1250-G

表征套件, Kintex UltraScale FPGA, IBERT, GTH收发器评估, Vivado

The from is a Kintex UltraScale™ FPGA KCU1250 characterization kit. The KCU1250 characterization kit provides everything user needed to evaluate the 20 GTH 16.3Gbps transceivers available on the UltraScale™ XCKU040-FFVA1156 FPGA. Access to both the Integrated Bit Error Ratio Test IBERT demonstration and the Vivado® design suite enables quick evaluation of the industry leading GTH transceivers. Each GTH quad and its associated reference clock are routed from the FPGA to the BullsEye connector pad. This enables users to connect to a broad range of evaluation platforms from backplanes and optical evaluation boards to high speed test equipment.

.

Hardware environment for characterizing, evaluating GTH transceivers on XCKU040-2FFVA1156E FPGA

.

Hardware, design tools, IP and pre-verified reference designs, 530K system logic cells

.

Integrated Bit Error Ratio Test IBERT reference design, 1920 DSP slices, 21.1Mb block RAM

.

BullsEye connector supporting a full GTH quad with four transmit/receive pairs

.

Five Samtec BullsEye connector pads for the GTH transceivers and reference clocks

.

2 pairs of differential MRCC I/P with SMA connector expand I/O with 3 FPGA mezzanine card interfaces

.

SD controller memory, I2C bus control and I/O, PMBus connectivity to on-board digital power supplies

.

Power status LEDs and general purpose DIP switches, LEDs, push buttons and test I/O display

.

SuperClock-2 module supporting multiple frequencies clocking

.

Fixed, 200MHz 2.5V LVDS oscillator wired to multi region clock capable MRCC inputs clocking