MAX186ACWP+

MAXIM INTEGRATED PRODUCTS  MAX186ACWP+  模数转换器, 低功率, 12 bit, 133 kSPS, 双 +/-, 4.75 V, 5.25 V, WSOIC

The is a low power, 8 channel, serial 12bit analogue to digital converter in 20 pin WSOIC package. It is a 12bit data acquisition system that combines an 8 channel multiplexer, high bandwidth track/hold and serial interface together with high conversion speed and ultra low power consumption. The analogue inputs are software configurable for unipolar/bipolar and single ended/differential operation. The 4 wire serial interface directly connects to SPI, QSPI and MICROWIRE devices without external logic. A serial strobe output allows direct connection to TMS320 family digital signal processors. It uses either the internal clock or an external serial interface clock to perform successive approximation A/D conversions. The serial interface can operate beyond 4MHz when the internal clock is used. It provides a hard wired complementary SHDN pin and two software selectable power down modes.

.

8 channel single ended or 4 channel differential inputs

.

Operating temperature range from 0°C to 70°C

.

Single +5V or ±5V operation

.

Low power of 1.5mA in operating mode and 2µA in power down mode

.

Internal 4.096V reference

.

Sampling rate is 133KSPS

.

Reference buffer amplifier simplifies gain trim

.

Total harmonic distortion is -80dB