DAC7800

双路单片 CMOS 12 位乘数模转换器

The ,DAC7801 and DAC7802 are members of a new family of monolithic dual 12-bit CMOS multiplying Digital-to-Analog Converters DACs. The digital interface speed and the AC multiplying performance are achieved by using an advanced CMOS process optimized for data conversion circuits. High stability on-chip resistors provide true 12-bit integral and differential linearity over the wide industrial temperature range of –40°C to +85°C.

The DAC7800 features a serial interface capable of clocking-in data at a rate of at least 10MHz. Serial data is clocked edge triggered MSB first into a 24-bit shift register and then latched into each DAC separately or simultaneously as required by the application. An asynchronous CLEAR control is provided for power-on reset or system calibration functions. It is packaged in a 16-pin 0.3" wide plastic DIP.

The DAC7801 has a 2-byte 8 + 4 double-buffered interface. Data is first loaded level transferred into the input registers in two steps for each DAC. Then both DACs are updated simultaneously. The DAC7801 features an asynchronous CLEAR control. The DAC7801 is packaged in a 24-pin 0.3" wide plastic DIP. The DAC7802 has a single-buffered 12-bit data word interface. Parallel data is loaded edge triggered into the single DAC register for each DAC. The DAC7802 is packaged in a 24-pin 0.3" wide plastic DIP.

.

TWO DACs IN A 0.3" WIDE PACKAGE

.

SINGLE +5V SUPPLY

.

HIGH SPEED DIGITAL INTERFACE: Serial—DAC7800 8 + 4-Bit Parallel—DAC7801 12-Bit Parallel—DAC7802

.

MONOTONIC OVER TEMPERATURE

.

LOW CROSSTALK: –94dB min

.

FULLY SPECIFIED OVER –40°C TO +85°C

.

APPLICA ONS

.

PROCESS CONTROL OUTPUTS

.

ATE PIN ELECTRONICS LEVEL SETTING

.

PROGRAMMABLE FILTERS

.

PROGRAMMABLE GAIN CIRCUITS

.

AUTO-CALIBRATION CIRCUITS

All trademarks are the property of their respective owners.