RM48L952PGET

TEXAS INSTRUMENTS  RM48L952PGET  微控制器, 32位, ARM 皮质-R4F, 220 MHz, 3 MB, 256 KB, 144 引脚, LQFP

The is a 32-bit high-performance RISC Flash Microcontroller for safety systems. The safety architecture includes dual CPUs in lockstep, CPU and memory BIST logic, ECC on both the flash and the data SRAM, parity on peripheral memories and loopback capability on peripheral I/Os. The RM48L952 device integrates the ARM Cortex-R4F floating-point CPU. The CPU offers an efficient 1.66 DMIPS/MHz and has configurations that can run up to 220MHz, providing up to 365 DMIPS. The device supports the little-endian [LE] format. The RM48L952 device has 3MB of integrated flash and 256kB of data RAM. Both the flash and RAM have single-bit error correction and double-bit error detection. The flash memory on this device is a non-volatile, electrically erasable and programmable memory implemented with a 64-bit-wide data bus interface. The flash operates on a 3.3V supply input same level as I/O supply for all read, program and erase operations.

.

Dual CPUs running in lockstep

.

ECC on flash and RAM interfaces

.

Built-in self-test BIST for CPU and on-chip RAMs

.

Error signalling module with error pin

.

Voltage and clock monitoring

.

Efficient 1.66 DMIPS/MHz with 8-stage pipeline

.

FPU with single- and double-precision

.

Memory protection unit MPU - 12 region

.

Open architecture with third-party support

.

16-bit External memory interface

.

Consistent memory map across family

.

Real-time interrupt R timer OS timer

.

96-channel Vectored interrupt module VIM

.

2-channel Cyclic redundancy checker CRC

.

Direct memory access DMA controller

.

Frequency-modulated phase-locked loop 9FMPLL with built-in slip detector

.

Separate no modulating PLL

.

Trace and calibration capabilities

.

10/100Mbps Ethernet MAC EMAC - IEEE 802.3 compliant

.

2-port USB host controller, one full-speed USB device port