LPC4370FET100

NXP  LPC4370FET100  微控制器, 32位, ARM 皮质-M4, 204 MHz, 282 KB, 100 引脚, TFBGA

The is a 32-bit Microcontroller based on ARM Cortex-M4 digital signal controller with an ARM Cortex-M0 coprocessor operates at a maximum frequency of 204MHz. The ARM Cortex-M4 core offers single-cycle Multiply-Accumulate and SIMD instructions and a hardware floating-point unit to support signal processing while the M0 coprocessor handles I/O and digital control processing. The device incorporates 282kB internal RAM, two high speed USB 2.0 Host/OTG/Device, 3-channel 12-bit A/D converter, 10-bit D/A converter and 49 general-purpose I/O pins. This device also features peripherals like four UARTs, two I2C, three SPI modules and two I2S. The ARM Cortex-M0 coprocessor is code and tool compatible with the Cortex-M4 core. The Cortex-M0 coprocessor offers with a simple instruction set and reduced code size and hardware multiply is implemented as a 32-cycle iterative multiplier.

.

Built-in memory protection unit MPU supporting eight regions

.

Built-in nested vectored interrupt controller NVIC

.

Hardware floating-point unit

.

Non-maskable Interrupt NMI input

.

JTAG and serial wire debug SWD, serial trace, eight breakpoints and four watch points

.

Enhanced trace module ETM and Enhanced trace buffer ETB support

.

System tick timer

.

Serial GPIO SGPIO interface

.

State configurable timer SCTimer/PWM subsystem on AHB

.

Global input multiplexer array GIMA

.

Quad SPI flash interface SPIFI

.

10/100T Ethernet MAC with RMII and MII interfaces and DMA support

.

High-speed USB 2.0 Host/Device/OTG & high speed USB 2.0 Host/Device interface

.

USB interface electrical test software included in ROM USB stack

.

Two C_CAN 2.0B controllers with one channel each

.

Two SSP controllers with FIFO and multi-protocol support

.

External memory controller EMC

.

LCD controller with DMA support

.

Secure digital Input/output SD/MMC card interface

.

Crystal oscillator with an operating range of 1MHz to 25MHz