TC7SB385FU

TC7SB385FU 解码器、多路复用器、信号开关 SOT-353/USV 标记JK

逻辑类型Logic Type| 总线开关 Bus Switch \---|--- 电路数Number of Circuits| 输入数Number of Inputs| 电源电压VccVoltage - Supply| 静态电流IqCurrent - Quiescent Max| 单电源 Single Supply 输出高，低电平电流Current - Output High, Low| 4.5 V ~ 5.5 V 低逻辑电平Logic Level - Low| The provides single bit of high-speed TTL-compatible switching. The low on resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as just 1-bit low-impedance switch with output-enable OE input. When OE is high, the switch is on and data can flow from port A to port B, or vice versa. When OE is low, the switch is open and a high-impedance state exists between the two ports. The internal diode which adds to power supply line is enable to realize the shift of signal level from 5 V to 3.3 V.All inputs are equipped with protection circuits against static discharge. Operating voltage: VCC = 4.5~5.5 V High speed operation: tpd = 0.25 ns max Low on resistance: RON = 5 Ω typ. ESD performance: Machine model > ±200 V Human body model > ±2000 V TTL level input control input Package: USV 高逻辑电平Logic Level - High| TC7SB385FU提供单一位的高速TTL兼容的交换开关。低导通电阻的开关允许以最小的传播延迟连接。该设备被组织为仅有1位低阻抗开关，有着输出使能（OE）输入。当OE低，开关和数据流可以从端口A端口B，反之亦然。当OE高，开关打开和高阻抗状态之间存在着两个端口。增加了电源线的内部二极管，实现信号电平从5 V到3.3 V的移位。所有输入都配有保护电路防止静电放电。 工作电压：VCC= 4.5〜5.5 V 高速运行：TPD =0.25 ns（最大） 低导通电阻RON= 5Ω（典型值） ESD性能：机器型号>±200 V 人体模式>±2000 V TTL电平输入（控制输入） 包装：USV 传播延迟时间@Vcc，CLMax Propagation Delay @ V, Max CL| Description & Applications| 描述与应用|