201540

VERMASON  201540  防静电存储, 屏蔽, 拉链, 袋装, 12 ", 305 mm, 9.84 ", 250 mm

The is a Statshield® M/I series Metalized Shielding Bag with Faraday cage protection against ESD. It is packaged in an oversized shielding bag rather than a cardboard box. Therefore, the bag is not exposed to water vapours that will degrade the metalized shielding layer. The bag has an additional layer of barrier protection because of our packaging. Ideally, ESD bag should be stored in a dry, well ventilated room with a reasonably consistent temperature of 68°F and be protected from exposure to direct sunlight. The user shall determine the suitability of the product for its intended use. s only obligation shall be to replace such quantity of the product proved to be defective.

.

Pass seam strength

.

Buried aluminium layer

.

Excellent see-through properties

.

Polycarbonate compatible

.

Zipped range avoids use of staples, clip or tapes

.

Conform with IEC 61340-5-1

.

<10¹¹R Inner and outer layers surface resistance

.

<25nJ Static shielding

.

<30V Capacitance probe to dissipate 1kV

.

>40% Light transmission Tobias

.

>50psi Burst strength

.

>10lb/in Heat seal

.

>25lbs Tear strength

.

>10lbs Puncture resistance

.

>100 Cycles abrasion resistance

Ideally, ESD bag should not be stored in ultraviolet sunlight, moisture or heat.