74ALVC16245DL

2.5V/3.3V 16Bit bus transceiver with direction pin 3-State

DESCRIPTION

The 74ALVC1624574ALVCH16245 is a 16-bit transceiver featuring non-inverting 3-State bus compatible outputs in both send and receive directions.

The 74ALVC1624574ALVCH16245 features two output enable nOE inputs for easy cascading and two send/receive nDIR inputs for direction control. nOE controls the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver.

The 74ALVCH16245 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.

The 74ALVC16245 has 5V tolerant inputs.

FEATURES

• Wide supply voltage range of 1.2V to 3.6V

• Complies with JEDEC standard no. 8-1A

• CMOS low power consumption

• MULTIBYTETM flow-through standard pin-out architecture

• Low inductance multiple VCC and ground pins for minimum noise and ground bounce

• Direct interface with TTL levels

• All data inputs have bus hold 74ALVCH16245 only

• Output drive capability 50Ω transmission lines @ 85°C

• Current drive ±24 mA at 3.0 V