CC2560BRVMT

蓝牙和双模式控制器 Bluetooth and Dual-Mode Controller

* Single-Chip _Bluetooth_ Solution Integrating _Bluetooth_ Basic Rate BR/Enhanced Data Rate EDR/ Low Energy LE Features Fully Compliant with the _Bluetooth_ 4.0 Specification Up to the HCI Layer * BR/EDR Features Include: * Up to 7 Active Devices * Scatternet: Up to 3 Piconets Simultaneously, 1 as Master and 2 as Slaves * Up to 2 SCO Links on the Same Piconet * Support for All Voice Air-Coding – Continuously Variable Slope Delta CVSD, A-Law, µ-Law, and Transparent Uncoded * CC2560B/CC2564B Devices Provide an Assisted Mode for HFP 1.6 Wideband Speech WBS Profile or A2DP Profile to Reduce Host Processing and Power * LE Features Include: * Support of Up to 10 CC2564 and CC2564B Simultaneous Connections * Multiple Sniff Instances Tightly Coupled to Achieve Minimum Power Consumption * Independent Buffering for LE Allows Large Numbers of Multiple Connections without Affecting BR/EDR Performance. * Built-In Coexistence and Prioritization Handling for BR/EDR and LE * Flexibility for Easy Stack Integration and Validation Into Various Microcontrollers, Such as MSP430™ and ARM® Cortex™-M3 and Cortex™-M4 MCUs * Highly Optimized for Low-Cost Designs: * Single-Ended 50-Ω RF Interface * Package Footprint: 76 Terminals, 0.6-mm Pitch, 8.10-mm × 8.10-mm mrQFN * Best-in-Class _Bluetooth_ RF Performance TX Power, RX Sensitivity, Blocking * Class 1.5 TX Power Up to +12 dBm * Internal Temperature Detection and Compensation to Ensure Minimal Variation in RF Performance Over Temperature, No External Calibration Required * Improved Adaptive Frequency Hopping AFH Algorithm with Minimum Adaptation Time * Provides Longer Range, Including 2xRange Over Other BLE-Only Solutions * ROM Spin to Enable Offload Host and Save Current with Assisted Audio SBC Encode and Decode On Chip * Advanced Power Management for Extended Battery Life and Ease of Design: * On-Chip Power Management, Including Direct Connection to Battery * Low Power Consumption for Active, Standby, and Scan _Bluetooth_ Modes * Shutdown and Sleep Modes to Minimize Power Consumption * Physical Interface: * Fully Programmable Digital PCM-I2S Codec Interface * CC256x Hardware Evaluation Tool: PC-Based Application to Evaluate RF Performance of the Device and Configure Service Pack * Device Terminal-to-Terminal Compatible with Previous Devices or Modules