EVAL-ADUM4136EBZ

ADuM4136 Gate and Power Driver 35VDC Output Evaluation Board

The EVAL-ADuM4136EBZ is an evaluation board for the ADuM4136 single channel gate driver, specifically optimized for driving insulated gate bipolar transistors IGBTs. Analog Devices iCoupler technology provides isolation between the input signal and the output gate driver. The ADuM4136 provides operation with voltages of up to 35V. With a dual-rail supply, the negative rail can go as low as -15V, providing robust turn off of the IGBT. The EVAL-ADuM4136EBZ evaluation board facilitates testing of the desaturation circuitry with pads available for standard desaturation detection. The evaluation board has layout locations for three different types of discrete switches allowing for a wide range of device testing. Screw terminals provide easy access to supplying the secondary side with either a single or dual supply.

.

4A peak drive output capability

.

Output power device resistance is less than 1ohm

.

Isolated fault output, soft shutdown on fault desaturation protection

.

Isolated fault and ready functions

.

Low propagation delay is less than 50ns

.

Operating temperature range from -40°C to +125°C

.

Output voltage range to 35V

.

Output and input undervoltage lockout UVLO

.

Jumpered enable/disable

ESD electrostatic discharge sensitive device.