MAX14782EAUA+

收发器, RS422, RS485, 500kbps, 1驱动器, 3 V至5.5 V电源, uMAX-8

The from Products is a 500Kbps, 3.3V to 5V, RS485/RS422 transceiver with ±35KV HBM ESD protection in 8 pin µMAX package. It is a 3.3V to 5V ESD protected transceiver intended for half-duplex RS485/RS422 communication up to 500Kbps. The device is optimized for extended cable runs while maximizing tolerance to noise. The MAX14782E integrated protection features include short circuit protected outputs, hot swap functionality and true fail-safe receiver, guaranteeing a logic high receiver output when inputs are shorted or open. Hot swap capability eliminates undesired transitions on the bus during power-up or hot insertion. The transceiver draws 1.9mA typ supply current when unloaded or when fully loaded with the drivers disabled and draws less than 10µA max of supply current in low power shutdown mode. Typical application includes motion controllers, field bus networks, encoder interfaces and backplane buses.

.

Supply voltage range is 3V to 5.5V, maximum data rate is 500Kbps

.

Operating temperature range from -40°C to 125°C

.

Integrated protection increases robustness

.

High ESD protection, ±35KV HBM ESD, ±20KV air gap IEC 61000-4-2 ESD, ±12KV contact IEC 61000-4-2 ESD

.

Short circuit protected outputs, true fail safe receiver, hot swap capability

.

Allows up to 32 transceivers on the bus

.

Saves board space, low 10µA maximum shutdown current

.

Receiver output skew is 30ns