Telecom & Ethernet Connectors FL BT SPA
The Factory Line Wireless Bluetooth Access Point can be used as an access point for up to seven devices, as an Ethernet Client adaptor and as a serial Bluetooth Com Server.
The FL BLUETOOTH AP offers secure transmissions with 128 bit data encryption, support of LAN, PAN and SPP Bluetooth profiles, configurable range from 0.1 m to 250 m without obstacles and automatic roaming of an Ethernet client between several Bluetooth Access points.
**Features:**
* Ethernet Interface
* Interface Ethernet
* Type of Connection: RJ45 Female Connector
**Wireless Interface**
* Name: Bluetooth
* Frequency Range: ISM 2.4 GHz
* Transmission Capacity Max.: 14 dBm with Automatic Control
* Number of Wireless Interfaces: 1
* Wireless Modules That Can Be Connected: 7
* Profiles Supported: LAP, PAN, SPP
**Wireless Card**
* No. 1
* Type Bluetooth: 2.4 GHz Up-to-1 Mbps
* Assembly Instructions Permanently Installed
**Antenna**
* Assembly Instructions External OMNI Omnidirectional Antenna, Antennas Can Be Exchanged
* No. 1
* Type of Connection: SMA Male
**Power Supply for Module Electronics**
* Type of Connection: Via COMBICON
* Supply Voltage: 24 VDC
* Range of Supply Voltages: 9 VDC ... 30 VDC
* Supply Current: 200 mA
**Functions**
* Operating Modes: Access Point/Ethernet Client Adapter/COM Server
* Configuration: Web-Based Management
* Automatic Channel Selection: FHSS, AFH
* Security: 128-bit Data Encoding
* MAC Filter
* Authentication
* PIN
* Non-Discoverable
**General Data
* **Dimensions: 80 W x 65 H x 25 D mm
* Weight: 95 g
* Ambient Temperature Operation: –30°C ... +65°C
* Ambient Temperature Storage/Transport: –40°C ...+ 85°C
* Permissible Humidity Operation: 5-90% Non-Condensing
* Permissible Humidity Storage/Transport: 10-95% Non-Condensing
* Air Pressure Operation: 795 hPa ... 1080 hPa Up-to-2000 m Above Mean Sea Level
* Degree of Protection: IP20
* Class of Protection: III
* Mounting Type: Wall Mounting