MINI MCR-SL-UI-REL

PHOENIX CONTACT MINI MCR-SL-UI-REL Signal Converter, Current, Voltage, Relay, 1Channels, 24VDC

The is a MCR Limit Value Switch with adjustable hysteresis and delay time, with screw connection. The 6.2mm wide configurable 3-way threshold value switch MINI MCR-SL-UI-REL is used to control and monitor analogue standard signals. On the input side, the analogue standards signals 0 to 20mA or 0 to 10V per DIP switch can be set. On the output side, a relay with PDT contact is available. The switching thresholds are set via potentiometer. The relay status is indicated by a yellow LED on the front of the housing. Power 19.2 to 30VDC can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.

.

3-way isolation

.

Configuration of the switching hysteresis

.

Configuration of the operating and closed circuit current behaviour

.

Setting of relay pickup times

.

Setting of dropout delay

.

Power supply possible via the foot element TBUS

.

Highly-compact threshold value switch for switching analogue limit values

.

Status and error indication via two diagnostic LEDs

.

Operating current/closed circuit current switch-over

.

PDT relay at output

.

Limit value can be freely adjusted via potentiometer on the front

.

Input signal, hysteresis and delay time can be configured via DIP switches