SN74HCT125DT

缓冲器和线路驱动器 Quad Bus Buff Gate With 3-State Outputs

Operating Voltage Range of 4.5 V to 5.5 V

High-Current Outputs Drive Up To 15 LSTTL Loads

Low Power Consumption, 80-µA Max ICC

Typical tpd = 12 ns

±6-mA Output Drive at 5 V

Low Input Current of 1 µA Max

Inputs Are TTL-Voltage Compatible

High-Current 3-State Outputs Drive Bus Lines or Buffer Memory Address Registers

得捷:
IC BUF NON-INVERT 5.5V 14SOIC

立创商城:
SN74HCT125DT

德州仪器TI:
4-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

贸泽:
缓冲器和线路驱动器 Quad Bus Buff Gate With 3-State Outputs

艾睿:
This SN74HCT125DT buffer and line driver from Texas Instruments is used to amplify an analog or digital signal by driving the input to the transmission line. With a 3-state output, this is power management at its best. This line driver has a minimum operating temperature of -40 °C and a maximum of 85 °C. In order to ensure safe delivery and enable quick mounting of this component after delivery, it will be encased in tape and reel packaging during shipment. It has 4 channels per chip. This non-inverting device has a typical operating supply voltage of 5 V. Its minimum operating supply voltage of 4.5 V, while its maximum is 5.5 V.

安富利:
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC T/R

Verical:
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC T/R

Newark:
Buffer, 74HCT125, 5.5 V to 4.5 V, SOIC-14