LPC1756FBD80Y

LPC1756FBD80Y概述

ARM MCU微控制单元, LPC Family LPC1700 Series Microcontrollers, ARM 皮质-M3, 32位, 100 MHz, 256 KB, 32 KB

Overview

The LPC1756 is a Cortex-M3 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 100 MHz. Features include 256 kB of flash memory, 32 kB of data memory, USB Device/Host/OTG, 8-channel DMA controller, 4 UARTs, 2 CAN channels, 2 SSP, 1 SPI, 2 I2C, I2S, 8-channel 12-bit ADC, DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 52 general purpose I/O pins.

MoreLess

## Features

* ARM Cortex-M3 processor, running at frequencies of up to 100 MHz

* ARM Cortex-M3 built-in Nested Vectored Interrupt Controller NVIC

* Up to 256 kB on-chip flash programming memory

* Up to 32 kB of SRAM

* In-System Programming ISP and In-Application Programming IAP

* Eight channel General Purpose DMA controller GPDMA

* Multilayer AHB matrix interconnect provides a separate bus for each AHB master

* Split APB bus allows high throughput with few stalls between the CPU and DMA

* USB 2.0 full-speed device/Host/OTG controller with dedicated DMA controller

* Four UARTs with fractional baud rate generation

* CAN 2.0B controller with two channels

* SPI controller with synchronous, serial, full duplex communication

* Two SSP controllers with FIFO and multi-protocol capabilities

* Two I2C-bus interfaces supporting fast mode with a data rate of 400 kbit/s

* I2S Inter-IC Sound interface for digital audio input or output

* 52 General Purpose I/O GPIO pins with configurable pull-up/down resistors

* 12-bit Analog-to-Digital Converter ADC with conversion rates up to 200 kHz

* 10-bit Digital-to-Analog Converter DAC

* Four general purpose timers/counters

* One motor control PWM with support for three-phase motor control

* Quadrature encoder interface that can monitor one external quadrature encoder

* One standard PWM/timer block with external count input

* Real-Time Clock RTC

* WatchDog Timer WDT

* ARM Cortex-M3 system tick timer, including an external clock input option

* Standard JTAG test/debug interface. Boundary scan Description Language BSDL is not available for this device

* Integrated PMU Power Management Unit

* Four reduced power modes

* Single 3.3 V power supply 2.4 V to 3.6 V

* One external interrupt input configurable as edge/level sensitive

* Non-maskable Interrupt NMI input

* Wakeup Interrupt Controller WIC

* Processor wake-up from Power-down mode via any interrupt

* Brownout detect with separate threshold for interrupt and forced reset

* Power-On Reset POR

* Crystal oscillator with an operating range of 1 MHz to 25 MHz

* 4 MHz internal RC oscillator trimmed to 1 % accuracy

* PLL allows CPU operation up to the maximum CPU rate

* USB PLL for added flexibility

* Code Read Protection CRP with different security levels

* Unique device serial number for identification purposes

## Target Applications

* eMetering

* Lighting

* Industrial networking

* Alarm systems

* White goods

* Motor control

## Features

LPC1756FBD80Y数据文档
型号 品牌 下载
LPC1756FBD80Y

NXP 恩智浦

下载
LPC11C14FBD48

NXP 恩智浦

下载
LPC1754FBD80

NXP 恩智浦

下载
LPC1778FBD144

NXP 恩智浦

下载
LPC1788FBD208

NXP 恩智浦

下载
LPC1758FBD80

NXP 恩智浦

下载
LPC1788FBD144

NXP 恩智浦

下载
LPC1752FBD80

NXP 恩智浦

下载
LPC1113FBD48/302

NXP 恩智浦

下载
LPC1114FBD48/302

NXP 恩智浦

下载
LPC1751FBD80

NXP 恩智浦

下载

锐单商城 - 一站式电子元器件采购平台